Pembrokeshire · Wales
Bath Re-enamelling for Pembroke Ferry homes
Damaged bath in Pembroke Ferry? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Several chips and rust patches
Covering Pembroke Ferry
Pembroke Ferry is about 1 mile north-east of Pembroke Dock, in Pembrokeshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Pembroke Ferry is one of 223 towns and villages in Pembrokeshire where we work.
Here we cover the SA72, SA73 and SA71 postcode area. You’ll find streets such as Pier Road, Essex Road and London Road. You will find Pembroke Ferry on the A477 and A4139, so it’s easy for us to reach. We also travel to Burton Ferry (1 mile north), Burton (1 mile north-east), Neyland (1 mile north-west), Great Honeyborough (1 mile north-west) and Llanstadwell (2 miles west). Further out, we also cover Haverfordwest (7 miles north), Milford Haven (5 miles west), The Marsh (7 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles west).
Near you in Pembroke Ferry
Typical jobs here are in homes near Ysgol Harri Tudur/Henry Tudor School, St Andrew's Church and Pembroke Dock CP School and the streets around them. The nearest railway station is Pembroke Dock station, roughly 0.5 miles south-west of the centre. A little further out are Pembroke Dock: Llanion (under half a mile south) and South Pembrokeshire Hospital (1.2 miles south-west). Open spaces near Pembroke Ferry include Pembroke River lower and Ferry Wood.
Bath re-enamelling in Pembroke Ferry, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We’re often asked to fix a peeling or bubbling previous coating and an original cast iron bath that needs restoring, on acrylic baths, pressed steel baths and Victorian roll-tops.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Pembroke Ferry (SA72, SA73, SA71)
- County
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Pembroke Ferry questions
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Work for landlords and builders
Landlords, letting agents and housing providers in Pembroke Ferry use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Towns and villages near Pembroke Ferry
Other services in Pembroke Ferry
What bath re-enamelling costs
Prices start from £350. You will know the full cost before you book. We look at:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether we combine several jobs
- The material
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- What it’s made of, if you know
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Repair or replace in Pembroke Ferry?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Straight answers about what a repair can do
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- No need to remove anything
Take a look at our full price list or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Pembroke Ferry
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- An old resurfacing that is failing
Comparing quotes
- How changes to the job are handled
- How the colour is matched
- How long it needs to cure
- A fixed quote, and whether VAT is included
How the visit works
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Clear the area around the damage
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Honest limits
Before you book, it’s worth knowing the limits too:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
