Carmarthenshire · Wales
Bath Re-enamelling for Pen-y-fan homes
Problem with your bath in Pen-y-fan? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
Pen-y-fan and nearby
Pen-y-fan is about 1 mile south-east of Llanelli, in Carmarthenshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 195 places across Carmarthenshire.
Jobs in SA15 and SA14 work the same way as everywhere else we cover. We regularly work on streets such as Bigyn Road, Firth Road and School Road. Pen-y-fan is on the A484, which makes it straightforward to reach. We also travel to Bigyn (1 mile west), Trostre (1 mile south), Morfa (1 mile south), Capel (1 mile north) and Halfway (1 mile north-east). Larger places within reach include Carmarthen (14 miles north-west), Ammanford (10 miles north-east), Burry Port (5 miles west), Betws (10 miles north-east), Pembrey and Burry Port Town (5 miles west) and Achddu (5 miles west).
What’s near Pen-y-fan
Around Pen-y-fan, we work in homes near Maes Y Morfa Community Primary School, Coedcae School and St Alban's Church and the streets around them. Nearby too are The Strip Mill Inn (under half a mile north) and St. John Lloyd (0.8 miles north-east). The nearest railway station is Llanelli station, about 0.8 miles west. Nearby you’ll also find Llanelli New Castle (1 mile west) and Parc Howard Museum (1.2 miles north-west). Green spaces nearby include Bryn Harddfan and WWT Llanelli Wetland Centre.
How we handle bath re-enamelling in Pen-y-fan
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include a coating lifting around the plughole and an original cast iron bath that needs restoring, on basins & shower trays, pressed steel baths and Victorian roll-tops.
All our work is covered by a one-year guarantee, wherever you are in Carmarthenshire.
- Area
- Pen-y-fan (SA15, SA14)
- Region
- Carmarthenshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Phone photos are fine. Just make sure we can see:
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- A wider photo showing the whole bath
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
More services for Pen-y-fan
What we are called out for in Pen-y-fan
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
What your quote should include
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- What the guarantee covers, and for how long
- How the room is protected while they work
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Repairing versus replacing in Pen-y-fan
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Why Pen-y-fan customers choose us
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
FAQs for Pen-y-fan
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What areas do you cover?
Everywhere in the UK, Pen-y-fan included. Travel is included in the price.
What happens once I’ve sent pictures?
We come back with a fixed price. There is no obligation to book.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How it works
We agree an arrival time beforehand. Once we’re there, the work takes a full day. The room is left tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
