Somerset · England
Bath re-enamelling & resurfacing in Pitcot, Somerset
Bath re-enamelling across Pitcot and nearby, generally in one visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Pitcot
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are a bath in a colour that no longer suits and an old resurfacing that’s failing.
Whatever the size of the job, you get the same one-year guarantee in Pitcot and across Somerset.
- Area
- Pitcot (BA3)
- Area hub
- Somerset
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Pitcot
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Customers normally contact us about:
- Wear marks under the taps
- Several chips and rust patches
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
What to look for in a quote
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Aftercare advice
- Who turns up on the day
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Also near Pitcot
Other services in Pitcot
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Ensure the area is dry
Ask for a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Take a look at our prices page and guide to resurfacing and replacement costs.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Where we work around Pitcot
Pitcot is about 3 miles south of Midsomer Norton, in Somerset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 640 places across Somerset, from the larger towns to small villages.
Postcode districts we cover here: BA3. Neighbouring places we cover include Holcombe (1 mile east), Stratton-on-the-Fosse (1 mile north), Stoke St Michael (1 mile south), Coleford (2 miles east) and White Post (2 miles north). Within a short drive, we also cover Frome (8 miles east), Wells (7 miles west), Midsomer Norton (3 miles north), Shepton Mallet (4 miles south-west), Street (14 miles south-west) and Glastonbury (12 miles south-west).
What’s near Pitcot
We visit homes around The Holcombe Inn and St Andrew, among other places. Well-known places in the area include Paulton Memorial Hospital (3.9 miles north) and Oakhill Manor Museum (1.8 miles south-west). The countryside around Pitcot includes Lechmere Water.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Common questions in Pitcot
Do you work in Pitcot?
We do. We send a technician to Pitcot for every job, with no extra charge for travel.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Is there any odour?
Expect a mild smell while we’re working.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
