Somerset · England
Bath re-enamelling & resurfacing in Holcombe, Somerset
Full bath re-enamelling and resurfacing in Holcombe, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that is seen better days
About our bath re-enamelling in Holcombe
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, in acrylic baths, pressed steel baths and cast iron baths.
Big or small, it’s backed by a one-year guarantee in Holcombe and across Somerset.
- Where
- Holcombe (BA3)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Holcombe: your questions answered
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath re-enamelling in Holcombe?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your BA3 postcode.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Holcombe.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How to care for the repair
Simple care helps the repair last. We recommend:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day for most jobs. We leave the room clean and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Our work in Holcombe
Holcombe is about 3 miles south of Midsomer Norton, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Holcombe is one of 640 towns and villages in Somerset where we work.
Every address in BA3 is within our area, from the main roads to the quietest streets. Local streets include Holcombe Hill, Longleat Lane and Kingsway, all of which we cover. Other places close to Holcombe include Pitcot (1 mile west), Coleford (1 mile east), Stratton-on-the-Fosse (1 mile north-west), Stoke St Michael (2 miles south) and Leigh upon Mendip (2 miles south-east). We also work in nearby towns such as Frome (7 miles east), Wells (8 miles west), Midsomer Norton (3 miles north), Shepton Mallet (5 miles south-west), Street (14 miles south-west) and Glastonbury (12 miles south-west).
Local landmarks in Holcombe
Locally, our jobs take us to homes close to Bishop Henderson Church of England Primary School, The Holcombe Inn and Newbury Manor School. Further afield, we also cover the area around Paulton Memorial Hospital (3.9 miles north) and Oakhill Manor Museum (2.6 miles south-west). Green spaces nearby include Lechmere Water.
What affects the price in Holcombe
Prices start from £350. You’ll know the full cost before booking. We look at:
- The material and finish
- Whether we combine several jobs
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- Something in shot to show the size
- A wider photo showing the entire bath
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Nearby places to Holcombe
Other services in Holcombe
Repair or replace in Holcombe?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- One-year guarantee on every repair
Take a look at our pricing and guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Holcombe?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- An old resurfacing that is failing
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
What to look for in a quote
- How to look after the finish
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
