Somerset · England
Bath re-enamelling & resurfacing in Stoke St Michael, Somerset
Our repair technicians come to Stoke St Michael for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Several chips and rust patches
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- A bath split right through the body
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Stoke St Michael
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
How we handle bath re-enamelling in Stoke St Michael
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on pressed steel baths, cast iron baths and acrylic baths, and common reasons people get in touch are stains that won’t shift and a coating lifting around the plughole.
Every repair is covered by a one-year guarantee.
- Location
- Stoke St Michael (BA3)
- Area hub
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes a full day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Get a quote
Most clients in Stoke St Michael get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Stoke St Michael. What changes the price is:
- How much damage there is
- What the surface is made of
- Whether old repairs or coatings need taking off
- How hard the colour is to match
Our prices are the same across the UK, so there’s no premium for Stoke St Michael. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Where you are, by postcode
- A coin or ruler next to the damage for scale
For a price in Stoke St Michael, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Stoke St Michael questions
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What areas do you cover?
We work UK-wide, so Stoke St Michael is covered. Prices do not change with location.
Do you work in Stoke St Michael?
Yes, we do. We send a technician to Stoke St Michael for every job, and the price is the same as everywhere else.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Our work in Stoke St Michael
Stoke St Michael is about 4 miles south of Midsomer Norton, in Somerset. Across the BA3 area, a technician comes to you. Stoke St Michael is one of 640 places in Somerset where we work.
Every address in BA3 is within our area. Jobs here include addresses on Mill Lane, Tower Hill and St Michaels Close. We also cover the places around Stoke St Michael: Leigh upon Mendip (1 mile east), Pitcot (1 mile north), Holcombe (2 miles north), Coleford (2 miles north-east) and Stratton-on-the-Fosse (2 miles north). Further out, we also cover Frome (7 miles east), Wells (8 miles west), Midsomer Norton (4 miles north), Shepton Mallet (4 miles south-west), Street (13 miles south-west) and Glastonbury (11 miles south-west).
Local landmarks in Stoke St Michael
We visit homes around Knatchbull Arms, Stoke St Michael Primary School and Church of St Michael and the streets around them. A little further out are Nunney Castle (4.5 miles east) and Paulton Memorial Hospital (5.4 miles north). For a walk, there’s Lechmere Water.
Places near Stoke St Michael
Other services in Stoke St Michael
Do you need bath re-enamelling in Stoke St Michael?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients generally contact us about:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- Wear marks under the taps
Comparing quotes
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- Aftercare advice
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How to look after the repair
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Every repair guaranteed for a year
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
