Somerset · England
Bath re-enamelling & resurfacing in Coleford, Somerset
Our technicians come to Coleford for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that won’t shift
Bath re-enamelling in Coleford without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Typical jobs include a dull, rough surface that won’t come clean and stains that won’t shift, in pressed steel baths, Victorian roll-tops and basins & shower trays.
A one-year guarantee comes as standard.
- Area
- Coleford (BA3)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Covering Coleford
Coleford is about 3 miles south-east of Midsomer Norton, in Somerset. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 640 places across Somerset.
Here we cover the BA3 postcode area. We regularly work on streets such as High Street, Careys Mead and Harris Vale and the roads around them. Close by, we cover Holcombe (1 mile west), Leigh upon Mendip (1 mile south), Pitcot (2 miles west), Kilmersdon (2 miles north) and Stratton-on-the-Fosse (2 miles north-west). We also work in nearby towns such as Frome (6 miles east), Wells (9 miles west), Midsomer Norton (3 miles north-west), Shepton Mallet (6 miles south-west), Street (15 miles south-west) and Glastonbury (13 miles south-west).
Landmarks near Coleford
Our customers here include homes close to Bishop Henderson Church of England Primary School, Eagle Inn and Newbury Manor School. Further afield, we also cover the area around Oakhill Manor Museum (3.5 miles west) and Nunney Castle (3.8 miles south-east). For a walk, there is Vallis Vale and Lechmere Water.
Also near Coleford
More services for Coleford
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We look at:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Any details about the material
- Something in shot to show the size
- Any earlier repairs or coatings
- A picture taken from further back
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Common problems we fix in Coleford
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Customers normally contact us about:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- A coloured bath you want in white
- Wear marks under the taps
What to look for in a quote
- How your room will be protected
- Aftercare advice
- How long the guarantee is and what it covers
- Who turns up on the day
When a repair is not the answer
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Coleford
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Coleford questions
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How much does bath re-enamelling cost in Coleford?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Why Coleford customers choose us
- Colour-matched on site
- Rooms protected and left tidy
- Nothing taken out or refitted
- A year’s guarantee on all work
See our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Coleford
Landlords, letting agents and housing providers in Coleford use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
