Nottinghamshire · England
Bath Re-enamelling in Plungar
Problem with your bath in Plungar? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
About our bath re-enamelling in Plungar
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and people most often call us about a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Plungar (NG13)
- Area hub
- Nottinghamshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Plungar. The price depends on:
- How much damage there is
- The colour and finish to match
- Where the damage is and how we get to it
- How many items we do on one visit
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Where you are, by postcode
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Plungar and the surrounding area
Plungar is about 9 miles west of Grantham, in Nottinghamshire. We travel to customers in Plungar and the surrounding area, so you do not need to take anything anywhere. Plungar is one of 329 places in Nottinghamshire we cover. We work right across the region, from Plungar to Birmingham (about 52 miles away).
Jobs in NG13 work the same way as everywhere else we cover. That includes homes on Church Lane, Granby Lane and Frog Lane. If you’re just outside Plungar, we cover Stathern (2 miles south), Harby (2 miles south-west), Eastwell (3 miles south), Eaton (4 miles south-east) and Goadby Marwood (5 miles south). Within a short drive, we also cover Carlton (11 miles north-west), Newark-on-Trent (12 miles north), West Bridgford (11 miles west), Netherfield (10 miles north-west), Bingham (6 miles north-west) and Radcliffe on Trent (8 miles north-west).
Local landmarks in Plungar
Locally, our jobs take us to homes close to Church of St Helen and The Anchor pub, among other places. Plungar’s nearest station is Elton & Orston station, roughly 3.7 miles north of the centre. Further afield, we also cover the area around Belvoir Castle (3.2 miles east).
What we’re called out for in Plungar
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Most people contact us after spotting something like this:
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What your quote should include
- What prep work is covered
- How soon you can use it again
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
Questions from Plungar
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How much does bath re-enamelling cost in Plungar?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your NG13 postcode.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Plungar?
We do. Repair technicians travel to Plungar from across the region, and the price is the same as everywhere else.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Other services in Plungar
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Plungar customers choose us
- Colour mixed on the day to match
- Work done at your home or business
- One-year guarantee on every repair
- Same prices wherever you are
See our pricing and bath cost comparison.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
How to get a price
For a price in Plungar, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Landlord and trade work in Plungar
Landlords, letting agents and housing providers in Plungar use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
