Glasgow · Scotland
Bath Re-enamelling for Pollokshaws homes
Full bath re-enamelling and resurfacing at your home in Pollokshaws, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Wear marks under the taps

Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Bath re-enamelling in Pollokshaws, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are chips and rust in more than one place and a bath that stays dull however much you clean it.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.

- Location
- Pollokshaws (G41, G43, G42)
- Area hub
- Glasgow
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Glasgow and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Pollokshaws and nearby
Pollokshaws is about 2 miles south of Glasgow, in Glasgow. Anywhere in G41, we come to you. Pollokshaws is one of 183 places in Glasgow we cover.
All of G41, G43 and G42 is covered. From Haggs Road, Hector Road and Lochlea Road or anywhere nearby, a technician can come to you. Being close to the A77, Pollokshaws is simple for us to get to. We also cover the places around Pollokshaws: Auldhouse (1 mile south-west), Shawlands (1 mile north-east), Langside (1 mile east), Hillpark (1 mile south) and Crossmyloof (1 mile north). Further out, we also cover Hillhead (3 miles north), Dowanhill (4 miles north), Woodlands (3 miles north), Woodside (4 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).
Landmarks near Pollokshaws
Around Pollokshaws, we work in homes near Couper Institute and Library, The Sir John Stirling Maxwell pub and Craigholme School and the streets around them. You’ll also find Glasgow (within half a mile south), Pollok Country Park (0.7 miles north-west) and Shawlands Academy (0.6 miles north-east). Pollokshaws has its own railway station: Pollokshaws West station. Nearby you’ll also find Silverburn Shopping Centre (1.7 miles west) and Glasgow Victoria Infirmary (1.1 miles east). The countryside around Pollokshaws includes Cathkin Braes.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the area is dry
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Advice
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
How to care for the repair
Most damage we see is avoidable. These habits help:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Have chips seen to early
- Avoid suction-cup mats
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Pollokshaws customers choose us
- Free fixed quotes from pictures
- Generally one visit, start to finish
- We leave the room as we found it
- No need to remove anything
Read our full price list and bath cost comparison.
Also in Pollokshaws
Common questions in Pollokshaws
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
How do I get a price for bath re-enamelling in Pollokshaws?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
What affects the price in Pollokshaws
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The material and finish
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- A picture taken from further back
- A close-up of the damage, in focus
- Something in shot to show the size
- Natural light rather than flash
Most customers in Pollokshaws get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.

