Glasgow · Scotland

Bath Resealing in Pollokshaws

Bath resealing in Pollokshaws without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Black spots in the silicone
  • Silicone coming away from the tiles
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Pollokshaws

Bath resealing in Pollokshaws, done in place

We reseal baths with them filled with water, so the joint opens fully, so the seal doesn’t tear when the bath is first used. Whether it’s stained silicone and a messy previous reseal, we can typically put it right, whatever the material.

All our work is covered by a one-year guarantee, wherever you are in Glasgow.

Where
Pollokshaws (G41, G43, G42)
Area hub
Glasgow
Cover
A year, on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What bath resealing costs

You will not pay by the hour. The price depends on:

  • Where the damage is and how we get to it
  • The material and finish
  • How many items we do on one visit
  • The colour and finish to match

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Looking after it afterwards

So the finish stays in good condition for years:

  • Reseal when black spots won’t clean off
  • Ventilate the bathroom well
  • Clean the joints with a mild cleaner
  • Keep the joints dry

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Pollokshaws and nearby

Pollokshaws is about 2 miles south of Glasgow, in Glasgow. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We work in all 183 towns and villages in Glasgow.

Postcode districts we cover here: G41, G43 and G42. Jobs here include addresses on Haggs Road, Hector Road and Lochlea Road. Pollokshaws is on the A77, which makes it straightforward to reach. Close by, we cover Auldhouse (1 mile south-west), Shawlands (1 mile north-east), Langside (1 mile east), Hillpark (1 mile south) and Crossmyloof (1 mile north). Further out, we also cover Hillhead (3 miles north), Dowanhill (4 miles north), Woodlands (3 miles north), Woodside (4 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).

Around Pollokshaws

Locally, our jobs take us to homes close to Couper Institute and Library, The Sir John Stirling Maxwell pub and Craigholme School. You’ll also find Glasgow (less than half a mile south), Pollok Country Park (0.7 miles north-west) and Shawlands Academy (0.6 miles north-east). Pollokshaws has its own railway station: Pollokshaws West station. Other landmarks nearby include Silverburn Shopping Centre (1.7 miles west) and Glasgow Victoria Infirmary (1.1 miles east). Open spaces near Pollokshaws include Cathkin Braes.

Map of Pollokshaws © OpenStreetMap contributors

Different materials, different repairs

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

What we do, step by step

We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take about two hours for a bath, and we leave the room as we found it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access
  • Open a window if you can

How to get a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Related advice

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Hollow or loose tiles
  • Rotten walls or floors behind the bath
  • Gaps too big for silicone alone

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Shower trays & enclosures
  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks

Signs you need bath resealing in Pollokshaws

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

The most common problems we are called about are:

  • Silicone coming away from the tiles
  • Black mould in the sealant
  • A messy previous reseal
  • Water getting behind the bath or tray

Comparing quotes

  • How your room will be protected
  • Whether the price covers travel
  • Whether the price is fixed and includes VAT
  • What the guarantee covers, and for how long

10 questions to ask before booking

Your questions about bath resealing in Pollokshaws

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Do you cover Pollokshaws?

Yes. We work across the UK and come to Pollokshaws and the rest of Glasgow. Send photos and we’ll quote, or call 0345 017 0787.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

Do you seal over the old sealant?

We always remove the old sealant completely. New silicone will not bond to old.

Landlords, agents and businesses in Pollokshaws

We carry out planned and one-off repairs for housing associations and facilities teams in Glasgow and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.