Glasgow · Scotland

Bath Re-enamelling for Polmadie homes

We travel to Polmadie for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Several chips and rust patches
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Polmadie

What we are called out for in Polmadie

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.

You may need us if you’ve spotted:

  • Thin, worn enamel in places
  • Brown or grey marks that don’t clean off
  • An old resurfacing that’s failing
  • Lots of chips and rust spots

What to look for in a quote

  • What happens if they find more damage
  • Aftercare advice
  • Whether the price covers travel
  • How your room will be protected

10 questions to ask before booking

Bath re-enamelling in Polmadie, done in place

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Common call-outs are for a peeling or bubbling previous coating and a coloured bath you want in white, in cast iron baths, Victorian roll-tops and acrylic baths.

All of our repairs are guaranteed for twelve months in Polmadie and everywhere else. If something goes wrong with the work, we come back.

Location
Polmadie (G44, G73, G45)
Region
Glasgow
Cover
12 months on all our work
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Repair or replace in Polmadie?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Polmadie

  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year
  • Typically one visit, start to finish
  • Nothing taken out or refitted

Read our prices page and bath cost comparison.

Prices and what affects them

Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • Any earlier repairs that need removing first
  • The size and number of damaged areas

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Send photos for a quote

Before you send photos, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • One picture of the entire bath
  • A clear, close picture of the problem area
  • The material, if you know it

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Landlord and trade work in Polmadie

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Polmadie: your questions answered

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

Do you work in Polmadie?

We do. Repair technicians travel to Polmadie from across the region, and the price is the same as everywhere else.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Can you quote from photos?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Honest limits

Before you book, it’s worth knowing the limits:

  • A metal bath with a through crack
  • Steel that has corroded right through
  • Problems we cannot see until an old finish comes off

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

What we do, step by step

Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s usually ready the day after.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on
  • Point us to the nearest place to park

Get a quote

For a price in Polmadie, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Advice

Polmadie and nearby

Polmadie is about 3 miles north-east of Giffnock, in Glasgow. Whether you are in the middle of Polmadie or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover 183 places across Glasgow, from the larger towns to small villages.

Our visits in G44, G73 and G45 are booked in the same way as anywhere else. Whether you live on Cavin Road, Menock Road and Spittal Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Croftfoot (1 mile south), King's Park (1 mile north-west), Spittal (1 mile east), Toryglen (1 mile north) and Simshill (1 mile south-west). Larger places within reach include Glasgow (3 miles north-west), Hillhead (5 miles north-west), Dowanhill (5 miles north-west), Woodlands (4 miles north-west), Woodside (4 miles north) and North Kelvinside (5 miles north).

Local landmarks in Polmadie

Around Polmadie, we work in homes near Cathkin Park, Glasgow and Couper Institute and Library and the streets around them. There is a railway station in Polmadie itself: Croftfoot station. Further afield, we also cover the area around Scottish Football Museum (0.9 miles north-west) and New Victoria Hospital (1.4 miles north-west). Green spaces nearby include Hogganfield Loch and Cathkin Braes.

Map of Polmadie © OpenStreetMap contributors

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.