Glasgow · Scotland
Bath Re-enamelling for King's Park homes
Full bath re-enamelling and resurfacing in King's Park, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Bath re-enamelling in King's Park without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. Common call-outs are for a bath that stays dull however much you clean it and chips and rust in more than one place, in cast iron baths, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- King's Park (G44, G42, G73)
- County
- Glasgow
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The material
- How many items we do on one visit
- Where the damage is and how we get to it
- The colour and finish to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Any details about the material
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Most clients in King's Park get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Repairing versus replacing in King's Park
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why King's Park customers choose us
- Everything repaired in place
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- Typically one visit, start to finish
See our prices page or resurfacing vs replacement cost guide.
More services for King's Park
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in King's Park
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
King's Park and nearby
King's Park is about 2 miles north-east of Giffnock, in Glasgow. From the centre of King's Park to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. King's Park is one of 183 places in Glasgow where we work.
Here we cover the G44, G42 and G73 postcode area. From Elmore Lane, Menock Road and Third Avenue or anywhere nearby, we can come to you. Close by, we cover Polmadie (1 mile south-east), Toryglen (1 mile north), Croftfoot (1 mile south-east), Mount Florida (1 mile west) and Simshill (1 mile south-west). Further out, we also cover Glasgow (3 miles north-west), Hillhead (4 miles north-west), Dowanhill (5 miles north-west), Woodlands (4 miles north), Woodside (4 miles north) and North Kelvinside (4 miles north).
Near you in King's Park
We visit homes around Glasgow, John Bosco Secondary School and Cathkin Park. Also close by are Couper Institute and Library (0.9 miles west) and Holyrood Secondary School (1 mile north-west). King's Park has its own railway station: Kings Park station. Well-known places in the area include New Victoria Hospital (1 mile north-west) and Princes Square (2.7 miles north). Open spaces near King's Park include Cathkin Braes and Hogganfield Loch.
How to care for the repair
Nothing complicated is needed:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Your questions about bath re-enamelling in King's Park
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to King's Park?
Yes. We work across the UK and travel to King's Park. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you quote from pictures?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Which areas do you work in?
Everywhere in the UK, King's Park included. Travel is included in the price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
About our accreditations · Every repair comes with a one-year guarantee.
