Swansea · Wales
Bath re-enamelling & resurfacing in Port Tennant, Swansea
Our repair technicians come to Port Tennant for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
Bath re-enamelling at your home in Port Tennant
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a roll-top that’s seen better days and a dull, rough surface that won’t come clean, on cast iron baths, basins & shower trays and Victorian roll-tops.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Port Tennant (SA1)
- Area hub
- Swansea
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Also near Port Tennant
More services for Port Tennant
What we cannot put right
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What we are called out for in Port Tennant
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Typical reasons for a call-out include:
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
Questions to ask before booking
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- How changes to the job are handled
FAQs for Port Tennant
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
What happens after I send pictures?
We come back with a fixed price, usually with dates to choose from. There’s no obligation to book.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Port Tennant.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you work in Port Tennant?
Yes. We work across the UK and come to Port Tennant and the rest of Swansea. Send photos and we’ll quote, or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Covering Port Tennant
Port Tennant is about 1 mile east of Greenhill, in Swansea. Customers in Port Tennant get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Port Tennant is one of 153 towns and villages in Swansea we cover.
All of SA1 is covered, from the main roads to the quietest streets. Whether you live on Dupre Road, Morris Lane and Ruston Road or a nearby road, we can come to you. We also travel to Waterfront (1 mile south-west), St Thomas (1 mile north-west), Foxhole (1 mile north-west), Maritime Quarter (1 mile south-west) and Hafod (1 mile north-west). We also work in nearby towns such as Morriston (3 miles north), Gorseinon (6 miles north-west), Cwm Gwyn (3 miles west), Llwchwr (6 miles north-west), Mumbles (4 miles south-west) and Penderry (3 miles north-west).
What’s near Port Tennant
In Port Tennant, that means homes near Danygraig Primary School, Cwm Level Park and Dynevor School, among other places. Other local landmarks include Church of Saint Thomas (0.5 miles west), The New Union Inn (less than half a mile south) and Pentrehafod School (1.4 miles north-west). The nearest railway station is Swansea station, about 1.1 miles west of the centre. Well-known places in the area include The Tramshed (0.9 miles west) and Swansea (1 mile west). For a walk, there is Kilvey Hill and Pluck Lake.
What affects the price in Port Tennant
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Access to the area
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- One sharp close-up of the damage
- A picture taken from further back
- Your postcode, so we can check dates
For a price in Port Tennant, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Landlord and trade work in Port Tennant
We work for landlords, letting agents and housing providers in Port Tennant as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, photos and access details.
Repair or replace in Port Tennant?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- CHAS and Constructionline accredited
- We leave the room as we found it
- Honest advice, even when it means no job
- One price list for the whole UK
Take a look at our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
