Gwynedd · Wales
Bath re-enamelling & resurfacing in Porth Dinllaen, Gwynedd
Bath re-enamelling in and around Porth Dinllaen: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Bath re-enamelling in Porth Dinllaen without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Porth Dinllaen (LL53)
- County
- Gwynedd
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Porth Dinllaen?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
What you get with us
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
Read our full price list and resurfacing vs replacement cost guide.
What we’re called out for in Porth Dinllaen
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted any of these:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Comparing quotes
- What preparation is included
- How long it needs to cure
- Who will actually do the work
- Whether the price covers travel
Our work in Porth Dinllaen
Porth Dinllaen is about 26 miles south of Holyhead, in Gwynedd. Clients in Porth Dinllaen get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Porth Dinllaen is one of 165 towns and villages in Gwynedd we cover. You can also see our page for Liverpool, about 75 miles away.
Every address in LL53 is covered, from the main roads to the quietest streets. We also travel to Groesffordd (1 mile south), Morfa Nefyn (1 mile south-east), Edern (1 mile south), Nefyn (2 miles east) and Dinas (3 miles south). We also work in nearby towns such as Pwllheli (7 miles south-east), Criccieth (14 miles east), Penygroes (14 miles north-east), Pen-rallt (7 miles south-east) and Abersoch (8 miles south).
Local landmarks in Porth Dinllaen
Around Porth Dinllaen, we work in homes near Cliffs Inn and St Edern's Church. Nearby you’ll also find Carn Fadryn castle and hillfort (3.5 miles south). For a walk, there’s Pen Bryn Holborn.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Porth Dinllaen. The price comes down to:
- How much damage there is
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Unusual colours or finishes
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Send photos for a quote
Two or three clear pictures are usually enough. It helps if you send:
- A wider photo showing the whole bath
- Details of any past repairs
- Where you are, by postcode
- Any details about the material
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Places near Porth Dinllaen
What else we do in Porth Dinllaen
Landlord and trade work in Porth Dinllaen
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Questions from Porth Dinllaen
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover the entire of Gwynedd?
We work UK-wide, and that includes Porth Dinllaen. Prices do not change with location.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What we can’t put right
To be straight with you, there are a few things a repair will not fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly.
Materials we work on in Porth Dinllaen
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
