North Somerset · England

Bath Re-enamelling in Puxton

Bath re-enamelling for Puxton, without a refit. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Puxton

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Bath re-enamelling in Puxton, done in place

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are frequently asked to fix worn patches where water runs and sits and enamel that’s lost its shine and feels rough, across Victorian roll-tops, acrylic baths and cast iron baths.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Technician in a mask working on a freestanding roll-top bath
Where
Puxton (BS24)
County
North Somerset
Guarantee
One year on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

What we do, step by step

We agree an arrival time beforehand. Once we’re there, the work takes a full day for most jobs. The room is left tidy and ready to use once it has cured.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Clear the area around the damage
  • Let us know if it has been repaired before

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

How to care for the repair

Simple care helps the repair last. We recommend:

  • Store bottles off the bath
  • Dry the bath after use to stop limescale
  • Never use suction bath mats
  • A dripping tap should be fixed promptly

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

What affects the price in Puxton

Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:

  • How many items we do on one visit
  • Previous DIY repairs that have to come out
  • How many areas need work
  • The type of damage

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send pictures for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • One sharp close-up of the damage
  • Any details about the material
  • Natural light rather than flash
  • A coin beside the damage so we can judge size

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Work for landlords and builders

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Where we work around Puxton

Puxton is about 4 miles east of Weston-super-Mare, in North Somerset. Whether you are in the middle of Puxton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 86 places in North Somerset, from the larger towns to small villages.

Here we cover the BS24 postcode area. From Puxton Road, May's Lane and Puxton Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Hewish (1 mile north-west), East Rolstone (1 mile south-west), West Hewish (1 mile north-west), Nye (1 mile south) and Rolstone (1 mile south-west). We also work in nearby towns such as Weston-super-Mare (4 miles west), Portishead (9 miles north-east), Clevedon (5 miles north), Nailsea (6 miles north-east), Milton (4 miles west) and Worle (3 miles west).

Near you in Puxton

Typical jobs here are in homes near Priory Community School, Church of St Saviour and St Anne's Church Academy and the streets around them. The nearest railway station is Yatton station, about 2.1 miles north-east. Further afield, we also cover the area around Castle Batch (2.7 miles west) and Banwell Museum (2.6 miles south). Not far away are Cadbury Hill and Blake's Pools.

Map of Puxton © OpenStreetMap contributors

Repair or replace in Puxton?

A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • We come to you, anywhere in the UK
  • Same prices wherever you are
  • Fixed prices from your pictures
  • We will tell you if it’s not worth repairing

Read our full price list or resurfacing vs replacement cost guide.

When a repair isn’t the answer

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • Plumbing leaks, which need a plumber
  • Steel that has corroded right through

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

Questions from Puxton

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you change the colour of my bath?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send pictures.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Is there a smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.