Cambridgeshire · England
Bath re-enamelling & resurfacing in Rampton, Cambridgeshire
We travel to Rampton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
How we handle bath re-enamelling in Rampton
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and people most often call us about a roll-top that’s seen better days and lots of chips and rust spots.
All of our repairs are guaranteed for twelve months in Rampton and everywhere else. We return to put right any problem with the work.
- Location
- Rampton (CB24)
- Region
- Cambridgeshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- One visit for most repairs
- Same prices wherever you are
- Every repair guaranteed for a year
- We’ll tell you if it’s not worth repairing
Take a look at our pricing and bath cost comparison.
FAQs for Rampton
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Common problems we fix in Rampton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Wear marks under the taps
- A dull, rough surface that won’t come clean
- Stains that will not shift
- An old resurfacing that is failing
Questions to ask before you book
- What happens if they find more damage
- Whether a trained technician does the job
- Whether they match the colour on site
- What aftercare is recommended
Where we work around Rampton
Rampton is about 6 miles north of Cambridge, in Cambridgeshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Our technicians cover 371 places in Cambridgeshire. Our nearest city page is London, about 55 miles away.
We work across CB24 and the streets around it. That includes homes on High Street, The Green and Cow Lane. If you are just outside Rampton, we cover Northstowe (1 mile west), Westwick (2 miles south), Longstanton (2 miles west), Oakington (2 miles south-west) and Girton (4 miles south). We also work in nearby towns such as Cambridge (6 miles south), Huntingdon (12 miles west), St Ives (8 miles north-west), Newmarket (14 miles east), Ely (11 miles north-east) and Cambourne (8 miles south-west).
Around Rampton
Locally, our jobs take us to homes close to Cottenham Village College and Church of All Saints and the streets around them. The nearest railway station is Waterbeach station, about 4.9 miles south-east. Nearby you will also find The Farmland Museum (3.8 miles east) and Castle Hill earthworks (4.2 miles west).
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How the visit works
The work is clean and fairly quiet. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Clear the area around the damage
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Read more
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Places near Rampton
Also in Rampton
Looking after it afterwards
To keep it looking its best for years:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Unusual colours or finishes
- Doing more than one item at once
- Access to the area
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- One picture of the whole bath
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Rampton, and we’ll reply with a fixed quote.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
