Renfrewshire · Scotland
Bath Re-enamelling in Ranfurly
Bath re-enamelling for Ranfurly, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Ranfurly
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and thin, worn enamel in places.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Ranfurly (PA11, PA10)
- County
- Renfrewshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Landlords, agents and businesses in Ranfurly
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Ranfurly. The price reflects:
- The material and finish
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How many items we do on one visit
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- Your postcode, so we can check dates
- Any details about the material
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Ranfurly and the surrounding area
Ranfurly is about 3 miles north-west of Johnstone, in Renfrewshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We work in all 21 towns and villages in Renfrewshire. You can also see our page for Glasgow, about 12 miles away.
Here we cover the PA11 and PA10 postcode area. Streets in the area include Watt Road, Clevans Road and Kilgraston Road, all of which we cover. Neighbouring places we cover include Bridge of Weir (1 mile north-east), Kilbarchan (2 miles south-east), Crosslee (2 miles north-east), Houston (2 miles north-east) and Brookfield (2 miles east). Larger places within reach include Paisley (6 miles east), Renfrew (8 miles east), Johnstone (3 miles south-east), Erskine (6 miles north-east), Bishopton (5 miles north-east) and Glenburn (6 miles east).
Near you in Ranfurly
Locally, our jobs take us to homes close to Ranfurly Church of Scotland. The nearest railway station is Milliken Park station, about 2.6 miles south-east of the centre. Nearby you’ll also find Merchiston Hospital (2.5 miles east) and Ranfurly Castle (less than half a mile north). Not far away are Windy Hill and Castle Semple Loch.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Questions from Ranfurly
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Do you work in Ranfurly?
Yes. We cover the whole UK and come to Ranfurly and the rest of Renfrewshire. Send us pictures for a fixed quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes the best part of a day in most cases. We leave the room clean.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
How to get a price
Upload pictures of the damage and one of the entire item, and tell us you’re in Ranfurly, and we’ll reply with a fixed price.
Read more
Common problems we fix in Ranfurly
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
The most common problems we are called about are:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
What your quote should include
- What protection goes down before work starts
- Who turns up on the day
- Whether the price covers travel
- What happens if they find more damage
Also near Ranfurly
What else we do in Ranfurly
How to care for the repair
Most damage we see is avoidable. A few tips:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
