Greater London · England

Bath re-enamelling & resurfacing in Raynes Park, Greater London

We travel to Raynes Park for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Raynes Park?

How the visit works

Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll tell you if anything changes.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Keep a parking space free if you can
  • Open a window if you can

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed quote

Advice

About our bath re-enamelling in Raynes Park

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re often asked to fix thin, worn enamel in places and a bath that stays dull however much you clean it, in pressed steel baths, Victorian roll-tops and basins & shower trays.

A one-year guarantee comes as standard.

Where
Raynes Park (SW20, KT3, SM4)
Region
Greater London
Guarantee
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Covering Raynes Park

Raynes Park is about 2 miles south-west of Wimbledon, in Greater London. Clients in Raynes Park get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover 764 places across Greater London, from the larger towns to small villages. Our nearest city page is London, about 9 miles away.

Postcode districts we cover here: SW20, KT3 and SM4. Whether you live on Gore Road, Edna Road and Wyke Road or anywhere nearby, we can come to you. Main roads around Raynes Park include the A238 and A298, which makes travel easy. If you’re just outside Raynes Park, we cover West Barnes (1 mile south-west), Bushey Mead (1 mile north-east), Cannon Hill (1 mile east), Motspur Park (1 mile north-west) and Wimbledon Chase (1 mile north-east). Further out, we also cover London (9 miles north-east), City of Westminster (8 miles north-east), Marylebone (9 miles north-east), Kensington (7 miles north), St Pancras (10 miles north-east) and Shoreditch (11 miles north-east).

What’s near Raynes Park

We visit homes around The Raynes Park Tavern, West Wimbledon Primary School and Ursuline Preparatory School and the streets around them. You’ll also find St Saviour's Church (less than half a mile north-east), Cannon Hill Common (0.5 miles east) and Raynes Park High School (under half a mile west). There is a railway station in Raynes Park itself: Raynes Park station. Other landmarks nearby include Chessington Castle Hill (4.1 miles south-west) and Atkinson Morley Hospital (1 mile north). Not far away are Henman Hill and Derwent Floodwash.

  • Local facilities include Municipal Borough of Malden and Coombe (1.2 miles west)
Map of Raynes Park © OpenStreetMap contributors

Repair or replace: which is better?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Work done at your home or business
  • CHAS, Constructionline and SafeContractor accredited
  • Colour-matched on site
  • Same prices wherever you are

Take a look at our pricing or resurfacing vs replacement cost guide.

Raynes Park questions

Is there any odour?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can you repair several things at once?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can a failed resurfacing be redone?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What information do you need?

Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.

How much does bath re-enamelling cost in Raynes Park?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

What affects the price in Raynes Park

Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:

  • Doing more than one item at once
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • Natural light rather than flash
  • One sharp close-up of the damage
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Do you need bath re-enamelling in Raynes Park?

Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.

Most people contact us when they notice one of these:

  • An old resurfacing that is failing
  • A dull, rough surface that won’t come clean
  • Worn patches where water runs and sits
  • Brown or grey marks that don’t clean off

What your quote should include

  • Whether the colour is mixed to match
  • Whether cleaning and preparation are in the price
  • If travel is included in the price
  • How soon you can use it again

How to compare quotes

Looking after it afterwards

To keep it looking its best:

  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • Never use suction bath mats
  • Don’t leave bottles, razors or sponges standing on the surface

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.