Shropshire · England
Bath re-enamelling & resurfacing in Redhill, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Redhill and across Shropshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Bath re-enamelling in Redhill, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a peeling or bubbling previous coating and a bath that stays dull however much you clean it, we can help, on cast iron baths, acrylic baths and Victorian roll-tops alike.
Big or small, it’s backed by a one-year guarantee in Redhill and across Shropshire.
- Where
- Redhill (SY5)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Redhill
Redhill is about 3 miles south-west of Shrewsbury, in Shropshire. From the centre of Redhill to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Redhill is one of 433 places in Shropshire we cover. We work right across the region, from Redhill to Birmingham (about 40 miles away).
Jobs in SY5 work the same way as everywhere else we cover. Other places close to Redhill include Hook-a-Gate (1 mile east), Nobold (1 mile north-east), Bayston Hill (1 mile south-east), Pulley (1 mile east) and Radbrook Green (1 mile north-east). We also work in nearby towns such as Shrewsbury (3 miles north-east), Madeley (15 miles east), Monkmoor (3 miles north-east), Bagley (3 miles north-east), Underdale (3 miles north-east) and Coton Hill (3 miles north-east).
Near you in Redhill
We visit homes around Meole Brace School, Oakmeadow Church of England Primary and Nursery School and Christ Church and the streets around them. Redhill’s nearest station is Shrewsbury station, about 2.7 miles north-east. Nearby you will also find The Parade Shopping Centre (1.8 miles north) and Shrewsbury Castle (2.6 miles north-east). Not far away are Bomere Pool.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Redhill
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlords, agents and businesses in Redhill
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Redhill use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow most of the day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Read more
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for Redhill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Redhill clients choose us
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Honest advice, even when it means no job
Take a look at our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The material
- How easy the damage is to reach
- Unusual colours or finishes
- Any earlier repairs that need removing first
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Something in shot to show the size
Email us pictures of the damage and a wider shot of the whole item, with your SY5 postcode, and we will reply with a fixed price.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Places near Redhill
What else we do in Redhill
About our accreditations · Every repair comes with a one-year guarantee.
