Cornwall · England

Bath Re-enamelling for Redtye homes

Bath re-enamelling across Redtye and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Redtye?

Redtye and the surrounding area

Redtye is about 4 miles south-west of Bodmin, in Cornwall. Our technicians come to homes and businesses in Redtye and the surrounding area, so you don’t need to take anything anywhere. We cover 644 places in Cornwall, from the larger towns to small villages.

Postcode districts we cover here: PL30. Nearby, we also work in Rosehill (1 mile west), Lanivet (1 mile north-east), Lamorick (1 mile north-east), Bilberry (2 miles south) and Threewaters (2 miles north). Further out, we also cover Newquay (13 miles west), St Austell (7 miles south), Bodmin (4 miles north-east), Liskeard (14 miles east), Sandy Bottom (6 miles south) and Addington (15 miles east).

Around Redtye

Locally, our jobs take us to homes close to Lanivet Community Primary School and Church of St Nivet. For rail, the closest station is Roche station, roughly 2.4 miles south-west. Other landmarks nearby include Bodmin Hospital (2.9 miles north-east) and Luxulyan Museum And Heritage Centre (3.6 miles south-east). Not far away are Helman Tor and Red Moor nature reserve.

Map of Redtye © OpenStreetMap contributors

Bath re-enamelling in Redtye, done in place

We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can typically put it right, whatever the material.

Whatever the size of the job, you get the same one-year guarantee.

Area
Redtye (PL30)
Region
Cornwall
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Fix dripping taps quickly
  • Keep toiletries on a shelf rather than in the bath
  • Get any chip repaired quickly
  • Respect the curing time we give you

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What we can’t put right

We’d rather lose a job than do one that won’t last, so these are the limits:

  • An acrylic bath that flexes badly underfoot
  • Plumbing leaks, which need a plumber
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

How the visit works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day, and we’ll keep you posted as we go.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Let us know which floor the room is on
  • Have a window or extractor fan available

How to get a price

If you are in Redtye and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Send photos for a quote

Related advice

How we price bath re-enamelling

Resurfacing from £350. You will know the full cost before you book. We look at:

  • Doing more than one item at once
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach

Our prices are the same across the UK, so there’s no premium for Redtye. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from pictures

Before you send pictures, a few simple things make all the difference:

  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • One picture of the whole bath
  • Daylight if possible, and no flash reflection

To get a price, send a couple of pictures through our quote form or ring us. We will say immediately whether it can be repaired.

Repair or replace in Redtye?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK
  • Same prices wherever you are
  • We will tell you if it’s not worth repairing

Read our full price list and guide to resurfacing and replacement costs.

Signs you need bath re-enamelling in Redtye

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

These are the problems we’re asked about most:

  • Thin, worn enamel in places
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
  • Lots of chips and rust spots

What to look for in a quote

  • When it can be used again
  • How changes to the job are handled
  • Whether the price is fixed and includes VAT
  • Aftercare advice

How to compare quotes

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

If you manage property in Redtye, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

Your questions about bath re-enamelling in Redtye

How long is the bath unusable?

Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we’ll plan for it.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Will the new finish last?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.