Cornwall · England
Bath Re-enamelling for Bilberry homes
Full bath re-enamelling and resurfacing in Bilberry, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
How we handle bath re-enamelling in Bilberry
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a bath in a colour that no longer suits and an original cast iron bath that needs restoring, we can help, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Bilberry (PL26)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- The type of damage
- Where the damage is and how we get to it
- The material
- How many areas need work
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
You can take the pictures on your phone. Just make sure we can see:
- A photo taken from further back
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bilberry: your questions answered
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Bilberry and the surrounding area
Bilberry is about 5 miles north of St Austell, in Cornwall. We visit customers in Bilberry and nearby villages, so you don’t need to take anything anywhere. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
Postcode districts we cover here: PL26. With the B3278 close by, Bilberry is easy for our repair technicians to reach. We also travel to Hallew (1 mile south-west), Redtye (2 miles north), Rosehill (2 miles north), Lanivet (3 miles north) and Lamorick (3 miles north). Further out, we also cover Truro (15 miles south-west), Newquay (12 miles west), St Austell (5 miles south), Bodmin (5 miles north-east), Liskeard (15 miles east) and Sandy Bottom (4 miles south).
Near you in Bilberry
Locally, our jobs take us to homes close to Bugle School. Bilberry’s nearest station is Bugle station, about 0.5 miles south-west. Other landmarks nearby include Luxulyan Museum And Heritage Centre (2.1 miles south-east) and Bodmin Hospital (4.7 miles north-east). Open spaces near Bilberry include Tresayes Quarry and Hensbarrow Beacon.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
Signs you need bath re-enamelling in Bilberry
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People usually call us after spotting something like this:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Comparing quotes
- What aftercare is recommended
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- What happens if they find more damage
Repair or replace in Bilberry?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Bilberry customers choose us
- Normally one visit, start to finish
- Straight answers about what a repair can do
- No need to remove anything
- Technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Also near Bilberry
Also in Bilberry
Work for landlords and builders
Landlords, letting agents and housing providers in Bilberry use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
