Lincolnshire · England
Bath Re-enamelling in Revesby
Local bath re-enamelling for Revesby: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
Covering Revesby
Revesby is about 11 miles north of Boston, in Lincolnshire. We travel to clients in Revesby and nearby villages, so there’s no workshop to go to. Revesby is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Revesby to Leeds (about 77 miles away).
Our visits in PE22 work the same way as everywhere else we cover. If you are just outside Revesby, we cover Mareham le Fen (2 miles west), New Bolingbroke (2 miles south), Moorby (2 miles north), East Kirkby (2 miles north-east) and Wood Enderby (3 miles north-west). Larger places within reach include Boston (11 miles south), Horncastle (6 miles north-west), Woodhall Spa (7 miles west), Witham (10 miles south), Staniland (11 miles south) and Kirton (14 miles south).
Local landmarks in Revesby
In Revesby, that means homes near Church of St Lawrence, among other places.
Bath re-enamelling at your home in Revesby
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include worn patches where water runs and sits and a bath in a colour that no longer suits, on cast iron baths, acrylic baths and basins & shower trays.
All our work is covered by our one-year guarantee.
- Where
- Revesby (PE22)
- Area hub
- Lincolnshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- The material and finish
- Where the damage is and how we get to it
- Whether we combine several jobs
- The size and number of damaged areas
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Send photos for a quote
Two or three clear photos are usually enough. It helps if you send:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Let us know which floor the room is on
Ask for a price
To get a price, send a couple of pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Related advice
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Revesby
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Revesby questions
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What areas do you cover?
Everywhere in the UK, Revesby included. Travel is included in the price.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
When to call us in Revesby
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- Enamel that’s lost its shine and feels rough
- An old resurfacing that’s failing
- Lots of chips and rust spots
- A roll-top that’s seen better days
Comparing quotes
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- How the room is protected while they work
- The length of the guarantee and what it covers
Nearby places to Revesby
What else we do in Revesby
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Avoid suction-cup mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
