Dorset · England

Bath Re-enamelling in Rew

Bath re-enamelling across Rew and nearby, typically in one visit and guaranteed for a year.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Rew?

How we handle bath re-enamelling in Rew

Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. We regularly repair pressed steel baths, acrylic baths and basins & shower trays, and people most frequently call us about a coloured bath you want in white and stains that won’t shift.

All our work is covered by our one-year guarantee.

Where
Rew (DT2)
Region
Dorset
Guarantee
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

DIY repairs versus a professional job

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic that moves when you stand in it
  • Leaking taps or wastes (a plumber’s job)
  • Holes rusted through the metal

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Landlords, agents and businesses in Rew

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.

Looking after it afterwards

So the finish stays in good condition:

  • Repair dripping taps early
  • Keep suction mats out of the bath
  • Don’t leave a chip unrepaired
  • Use washing-up liquid and a soft cloth

A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

Repairing versus replacing in Rew

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Rew

  • Same prices wherever you are
  • Normally one visit, start to finish
  • Nothing taken out or refitted
  • Honest advice, even when it means no job

See our prices page or guide to resurfacing and replacement costs.

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we look at:

  • The material
  • Any earlier repairs that need removing first
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

How to get a fixed price

Before you send photos, these tips help us give you a firm price:

  • A clear, close picture of the problem area
  • Details of any past repairs
  • Any details about the material
  • A wider photo showing the whole bath

Email us a picture of the damage and a wider shot of the entire item, with your DT2 postcode, and we’ll come back with a fixed quote.

FAQs for Rew

How soon can you come?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Do I need to be at home?

Someone needs to let us in and show us the job. You don’t need to watch us work.

What areas do you cover?

Across the UK, and that includes Rew. Prices don’t change with location.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Rew and the surrounding area

Rew is about 9 miles north of Dorchester, in Dorset. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Rew is one of 462 towns and villages in Dorset we cover.

Jobs in DT2 work the same way as everywhere else we cover. We also cover the places around Rew: Buckland Newton (1 mile south-west), Henley (1 mile south-west), Sharnhill Green (1 mile east), Bookham (1 mile south-east) and Cosmore (1 mile west). We also work in nearby towns such as Dorchester (9 miles south), Blandford Forum (12 miles east), Gillingham (15 miles north-east), Shaftesbury (15 miles north-east), Sherborne (8 miles north-west) and Fordington (9 miles south).

Around Rew

Our clients here include homes close to Buckland Newton Church of England Primary School and Church of the Holy Rood. Not far away are Bookham Knoll.

Map of Rew © OpenStreetMap contributors

Signs you need bath re-enamelling in Rew

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

The most common problems we are called about are:

  • Staining under the taps and around the waste
  • A dull, rough surface that will not come clean
  • Several chips and rust patches
  • A coloured bath you want in white

What your quote should include

  • How long it needs to cure
  • Who will actually do the work
  • How to look after the finish
  • What the guarantee covers, and for how long

Our hiring checklist

What we do, step by step

Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive
  • Mention if the room is upstairs or in a flat

Ask for a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.