Swansea · Wales
Bath Re-enamelling in Reynoldston
We travel to Reynoldston for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Bath re-enamelling at your home in Reynoldston
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, and can be used again the next day. Whether it’s a bath in a colour that no longer suits and an original cast iron bath that needs restoring, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
Big or small, it’s backed by a one-year guarantee.
- Location
- Reynoldston (SA3)
- Area hub
- Swansea
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Reynoldston
What else we do in Reynoldston
Where we work around Reynoldston
Reynoldston is about 7 miles south of Llanelli, in Swansea. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Reynoldston is one of 153 towns and villages in Swansea where we work.
Here we cover the SA3 postcode area. We regularly work on streets such as Church Meadow, Robins Lane and Applegrove. If you are just outside Reynoldston, we cover Llanrhidian (2 miles north-east), Scurlage (2 miles south-west), The Common (2 miles north-east), Llanmadoc (3 miles north-west) and Port-Eynon (3 miles south). Larger places within reach include Swansea (11 miles east), Castle (11 miles east), Morriston (13 miles north-east), Mount Pleasant (11 miles east), Gorseinon (9 miles north-east) and Dyfaty (11 miles east).
Around Reynoldston
We visit homes around St George's Church, King Arthur Hotel and Knelston Primary School and the streets around them. A little further out are Reynoldston Camp (within half a mile south-east) and Gower Farm Museum & Tourist Centre (1.4 miles south-west). Open spaces near Reynoldston include Cwm Ivy Woods and Ryer's Down.
Signs you need bath re-enamelling in Reynoldston
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for any of the following:
- Stains that won’t shift
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
Before you book anyone
- The length of the guarantee and what it covers
- Who turns up on the day
- What aftercare is recommended
- Whether the colour is mixed to match
Questions from Reynoldston
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Are there extra charges for Reynoldston?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How much does bath re-enamelling cost in Reynoldston?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
Do you cover Reynoldston?
Yes, we do. Technicians travel to Reynoldston from across the region, and the price is the same as everywhere else.
Work for landlords and builders
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Landlords, letting agents and housing providers in Reynoldston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Have chips seen to early
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say right away whether it can be repaired.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Reynoldston. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- One price list for the whole UK
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Reynoldston. The price depends on:
- Doing more than one item at once
- How much damage there is
- The material and finish
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
You can take the photos on your phone. Just ensure we can see:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Upload a photo of the damage and one of the whole item, and tell us you’re in Reynoldston, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
