Flintshire · England
Bath re-enamelling & resurfacing in Rhos-y-brwyner, Flintshire
Problem with your bath in Rhos-y-brwyner? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Bath re-enamelling in Rhos-y-brwyner without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are a dull, rough surface that won’t come clean and worn patches where water runs and sits.
All of our repairs are guaranteed for twelve months in Rhos-y-brwyner and everywhere else. We return to put right any problem with the work.
- Where
- Rhos-y-brwyner (CH4)
- County
- Flintshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Rhos-y-brwyner
Also in Rhos-y-brwyner
Common problems we fix in Rhos-y-brwyner
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The things clients typically mention when they call include:
- A peeling or bubbling previous coating
- Wear marks under the taps
- Chips and rust in more than one place
- An outdated colour you’d like to change
What your quote should include
- How long it needs to cure
- What happens if the damage is worse than the photos show
- What prep work is covered
- Aftercare advice
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Rhos-y-brwyner. The price comes down to:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- A wider photo showing the whole bath
- Details of any past repairs
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
Send us pictures of the damage and a wider shot of the entire item, with your CH4 postcode, and we’ll reply with a fixed price.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Rhos-y-brwyner and nearby
Rhos-y-brwyner is about 2 miles south-east of Bwcle, in Flintshire. Jobs in Rhos-y-brwyner are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 139 places across Flintshire. You can also see our page for Liverpool, about 19 miles away.
All of CH4 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Wood Lane, Wat's Road and Rhos Avenue. We also travel to Penyffordd (1 mile north-east), Penymynydd (1 mile north-east), Little Mountain (1 mile north), Padeswood (1 mile north-west) and Spon Green (1 mile north-west). We also work in nearby towns such as Connah's Quay (5 miles north), Flint (7 miles north-west), Saltney (6 miles north-east), Mold (4 miles west), Holywell (11 miles north-west) and Lache (6 miles east).
Local landmarks in Rhos-y-brwyner
Locally, our jobs take us to homes close to Red Lion pub, St John the Baptist's Church and Ysgol Penyffordd and the streets around them. There’s a railway station in Rhos-y-brwyner itself: Penyffordd station. Nearby you will also find Buckley Library (1.9 miles north-west) and Broughton Shopping Park (3.7 miles north-east). Green spaces nearby include Padeswood Pool and Pen Pontblyddyn.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
How to look after the repair
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Have chips seen to early
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Landlords, agents and businesses in Rhos-y-brwyner
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Questions from Rhos-y-brwyner
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Flintshire.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Which areas do you work in?
Everywhere in the UK, Rhos-y-brwyner included. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
