Cardiff · Wales
Bath re-enamelling & resurfacing in Riverside, Cardiff
Full bath re-enamelling and resurfacing in Riverside, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Bath re-enamelling in Riverside without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, across pressed steel baths, cast iron baths and basins & shower trays.
Whatever the size of the job, it’s backed by a one-year guarantee in Riverside and across Cardiff.
- Area
- Riverside (CF11, CF10, CF5)
- Area hub
- Cardiff
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Riverside
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Towns and villages near Riverside
Other services in Riverside
What we are called out for in Riverside
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed any of these:
- A coloured bath you want in white
- Staining under the taps and around the waste
- Lots of chips and rust spots
- Worn patches where water runs and sits
Comparing quotes
- Whether there are any call-out or travel charges
- Aftercare advice
- How your room will be protected
- What the guarantee covers, and for how long
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Riverside. The price depends on:
- The type of damage
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- Any details about the material
- One picture of the entire bath
- Where you are, by postcode
- One sharp close-up of the damage
Send us photos of the damage and a wider shot of the entire item, with your CF11 postcode, and we will reply with a fixed quote.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Riverside. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Riverside
- We come to you, anywhere in the UK
- Fixed prices from your photos
- Nothing taken out or refitted
- We will tell you if it’s not worth repairing
Take a look at our prices page or bath cost comparison.
Riverside questions
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Cardiff.
Do you work in Riverside?
Yes. We work across the UK and come to Riverside. Send us pictures for a fixed quote, or call 0345 017 0787.
Riverside and the surrounding area
Riverside is about 2 miles south of Cardiff, in Cardiff. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Riverside is one of 91 towns and villages in Cardiff we cover.
All of CF11, CF10 and CF5 is covered. Jobs here include addresses on Major Road, Tudor Lane and Clare Road. Being close to the A4161, Riverside is easy for our technicians to reach. Nearby, we also work in Castle (1 mile north-east), Castle Quarter (1 mile east), Grangetown (1 mile south), Newtown (1 mile east) and Atlantic Wharf (1 mile east). Within a short drive, we also cover Ely (3 miles west), St Mellons (5 miles north-east), Llanrumney (4 miles north-east), Morristown (3 miles south), Birchgrove (3 miles north) and Rhiwbina (3 miles north). As one of the bigger places in Cardiff, Riverside sees plenty of our work.
Around Riverside
Typical jobs here are in homes near Centre for Occupational and Health Psychology, Sophia Gardens and Miller's Tavern, among other places. Also close by are Kitchener Primary School (0.5 miles west), St Mary of the Angels R C Church (under half a mile north-west) and Howardian High School (1 mile east). The nearest railway station is Cardiff Central station, roughly 0.5 miles south-east. Nearby you will also find Castle Arcade (under half a mile east) and Cardiff Castle (within half a mile north-east). The countryside around Riverside includes Roath Basin and Cock Hill.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Looking after it afterwards
Nothing complicated is needed:
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
