Dorset · England

Bath Re-enamelling in Rodwell

Full bath re-enamelling and resurfacing in Rodwell, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Rodwell homes

About our bath re-enamelling in Rodwell

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on basins & shower trays, acrylic baths and cast iron baths, and common reasons people contact us are brown or grey marks that don’t clean off and wear marks under the taps.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Where
Rodwell (DT4, DT3)
Area hub
Dorset
Cover
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What we can’t put right

Before booking, it’s worth knowing the limits too:

  • Leaks from fittings rather than the bath
  • Problems we can’t see until an old finish comes off
  • A bath split right through the body

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

When to call us in Rodwell

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

The most common problems we’re called about are:

  • Wear marks under the taps
  • A period or roll-top bath worth keeping
  • Enamel that’s lost its shine and feels rough
  • Lots of chips and rust spots

Questions to ask before booking

  • How the room is protected while they work
  • How changes to the job are handled
  • How to look after the finish
  • A fixed quote, and whether VAT is included

Choosing a repair company

What happens on the day

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed quote

Related advice

Landlords, agents and businesses in Rodwell

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

FAQs for Rodwell

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

What you get with us

  • A fixed quote before booking
  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year
  • One visit for most repairs

Take a look at our prices page and bath cost comparison.

Keeping it looking good

So the finish stays in good condition:

  • Avoid suction-cup mats
  • Repair dripping taps early
  • Don’t use the bath until it has fully cured
  • A quick wipe after use keeps limescale away

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

About Rodwell

Rodwell is about 1 mile south-west of Weymouth, in Dorset. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover all 462 towns and villages in Dorset.

All of DT4 and DT3 is within our area. You will find streets such as Bryn Road, Alma Road and Links Road, all of which we cover. Close by, we cover Weymouth (1 mile north-east), Melcombe Regis (1 mile north-east), Southill (1 mile north-west), Charlestown (1 mile west) and Greenhill (1 mile north-east). Within a short drive, we also cover Dorchester (7 miles north), Bridport (15 miles north-west), Portland (4 miles south), Fordington (7 miles north), Fortuneswell (4 miles south) and Wool (12 miles north-east).

Local landmarks in Rodwell

We visit homes around Budmouth College, Nothe Gardens and Beechcroft St Pauls CofE Primary School. Nearby too are Church of St Paul (less than half a mile east) and Belvedere Inn (0.6 miles south-east). For rail, the closest station is Weymouth station, roughly 0.7 miles north-east. Other landmarks nearby include Sandsfoot Castle (1.2 miles south) and Portwey Hospital (0.6 miles south-east). For a walk, there is Jordan Hill and Radipole Lake.

Map of Rodwell © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.