Shropshire · England
Bath re-enamelling & resurfacing in Rosehill, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Rosehill and across Shropshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that is seen better days
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Bath re-enamelling in Rosehill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath that stays dull however much you clean it and a roll-top that’s seen better days, on basins & shower trays, cast iron baths and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee in Rosehill and across Shropshire.
- Where
- Rosehill (TF9)
- Region
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Rosehill
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
- An old resurfacing that’s failing
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- What aftercare is recommended
What we can’t put right
It helps to know what we cannot do:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rosehill: your questions answered
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you cover the entire of Shropshire?
Across the UK, so Rosehill is covered. Our prices are the same everywhere.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Rosehill. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Fixed prices from your pictures
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
- No need to remove anything
Take a look at our full price list and resurfacing vs replacement cost guide.
Rosehill and the surrounding area
Rosehill is about 3 miles south of Market Drayton, in Shropshire. Jobs in Rosehill are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 433 places across Shropshire, from the larger towns to small villages. Our jobs stretch from Rosehill to Birmingham (37 miles away).
Our visits in TF9 work the same way as everywhere else we cover. Streets in the area include Rose Hill Road, Mount Lane and Warrant Road, and we cover them all. If you are just outside Rosehill, we cover Stoke Heath (1 mile north-west), Stoke-on-Tern (1 mile south-west), Buntingsdale Estate (2 miles north), Wollerton (2 miles north-west) and Ollerton (2 miles south). We also work in nearby towns such as Shrewsbury (14 miles south-west), Market Drayton (3 miles north), Coleham (15 miles south-west), Kingsland (15 miles south-west), Whitchurch (10 miles north-west) and Belle Vue (15 miles south-west).
What’s near Rosehill
Our clients here include homes close to Wistanwick United Reformed Church and Stoke-on-Tern Primary School and the streets around them. Further afield, we also cover the area around Cheswardine Castle (4 miles east) and Market Drayton Museum And Resource Centre (3.2 miles north). Open spaces near Rosehill include Hawk Lake and Quarry Wood.
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow most of the day. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Also near Rosehill
What else we do in Rosehill
Looking after it afterwards
After the repair has cured, a few habits help it last:
- A dripping tap should be fixed promptly
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Rosehill. What changes the price is:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
- How easy the damage is to reach
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
You can usually get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
