Shropshire · England
Bath Re-enamelling in Wollerton
Bath re-enamelling in Wollerton without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
How we handle bath re-enamelling in Wollerton
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s a coating lifting around the plughole and staining under the taps and around the waste, we can help, on cast iron baths, acrylic baths and basins & shower trays alike.
Every repair comes with our one-year guarantee.
- Where
- Wollerton (TF9)
- Area hub
- Shropshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Repair dripping taps early
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Our work in Wollerton
Wollerton is about 4 miles south-west of Market Drayton, in Shropshire. We visit clients in Wollerton and the surrounding area, so nothing has to leave your home. Wollerton is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 39 miles away.
We cover every part of the TF9 postcode area. You’ll find streets such as Wood Lane and Mill Road, all of which we cover. Neighbouring places we cover include Mickley (1 mile north), Marchamley Wood (1 mile north-west), Hodnet (1 mile south), Stoke Heath (1 mile east) and Marchamley (2 miles south-west). We also work in nearby towns such as Shrewsbury (14 miles south-west), Market Drayton (4 miles north-east), Coleham (14 miles south-west), Kingsland (14 miles south-west), Whitchurch (8 miles north-west) and Belle Vue (14 miles south-west).
What’s near Wollerton
A little further out are Red Castle (3.3 miles west) and Market Drayton Museum And Resource Centre (3.8 miles north-east). Green spaces nearby include Quarry Wood and Hawk Lake.
Wollerton: your questions answered
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you need bath re-enamelling in Wollerton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Questions to ask before booking
- Who turns up on the day
- What preparation is included
- What the guarantee covers, and for how long
- Whether they match the colour on site
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Doing more than one item at once
- The material and finish
- The type of damage
- Unusual colours or finishes
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- What it’s made of, if you know
- A photo taken from further back
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Wollerton
- Honest advice, even when it means no job
- One visit for most repairs
- Colour mixed on the day to match
- Work done at your home or business
See our pricing and guide to resurfacing and replacement costs.
What happens on the day
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Advice
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Wollerton
More services for Wollerton
About our accreditations · Every repair comes with a one-year guarantee.
