Shropshire · England
Bath re-enamelling & resurfacing in Belle Vue, Shropshire
Damaged bath in Belle Vue? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
Bath re-enamelling in Belle Vue, done in place
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. We work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and an original cast iron bath that needs restoring.
Whatever the size of the job, you get the same one-year guarantee in Belle Vue and across Shropshire.
- Area
- Belle Vue (SY1, SY3, SY2)
- Region
- Shropshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repair or replace in Belle Vue?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Belle Vue clients choose us
- Dust sheets down, tidy finish
- Colour-matched on site
- No need to remove anything
- Fixed prices from your pictures
Take a look at our prices page or bath cost comparison.
About Belle Vue
Belle Vue is about 1 mile south of Shrewsbury, in Shropshire. Wherever you are in the SY1 postcode area, we carry out the work at your property. We cover 433 places across Shropshire. You can also see our page for Birmingham, about 39 miles away.
Every address in SY1, SY3 and SY2 is within our area. From Vane Road, Mill Road and Grope Lane or a nearby road, we can come to you. Being close to the A5191, Belle Vue is easy for our repair technicians to reach. Neighbouring places we cover include Coleham (1 mile north), Kingsland (1 mile north-west), Shrewsbury (1 mile north), Frankwell (1 mile north-west) and Copthorne (1 mile north-west). Further out, we also cover Madeley (13 miles east), Wem (11 miles north), Broseley (13 miles south-east), Harlescott (3 miles north-east), Church Stretton (12 miles south) and Much Wenlock (11 miles south-east). Belle Vue is one of the larger places we cover in Shropshire.
Local landmarks in Belle Vue
Locally, our jobs take us to homes close to Holy Trinity with Saint Julian, Shrewsbury High School and The Coleham Tap and the streets around them. You’ll also find Coleham Primary School (under half a mile north) and Wakeman School (0.5 miles north). Belle Vue’s nearest station is Shrewsbury station, roughly 0.8 miles north of the centre. Well-known places in the area include Royal Shrewsbury Hospital (2 miles west) and Shrewsbury Castle (0.7 miles north). Green spaces nearby include Haughmond Hill and Bomere Pool.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The material and finish
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Looking after it afterwards
So the finish stays in good condition for years:
- Don’t leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Leave the bath for the full curing time before using it
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Landlords, agents and businesses in Belle Vue
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Belle Vue use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What we are called out for in Belle Vue
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
People typically call us after spotting one of these:
- Wear marks under the taps
- Stains that won’t shift
- A roll-top that’s seen better days
- A coloured bath you want in white
What your quote should include
- A fixed quote, and whether VAT is included
- What aftercare is recommended
- How the colour is matched
- How soon you can use it again
Belle Vue: your questions answered
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What happens if you find more damage?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Which areas do you work in?
We cover the entire UK, including Belle Vue and the rest of Shropshire. Send your postcode with your photos and we will offer you dates.
Also in Belle Vue
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Ask for a price
For a price in Belle Vue, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
