Wrexham · Wales

Bath Re-enamelling for Rossett homes

Local bath re-enamelling for Rossett: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Rossett

How we handle bath re-enamelling in Rossett

Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We work on cast iron baths, basins & shower trays and pressed steel baths, and the jobs we see most are a coating lifting around the plughole and a coloured bath you want in white.

Every repair comes with our one-year guarantee, wherever you are in Wrexham.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Rossett (LL12)
Region
Wrexham
Guarantee
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What we do, step by step

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

Get a free quote

Advice

Rossett: your questions answered

Can you quote from photos?

Nearly always. If photos don’t show enough, we will ask for another angle.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

How long is the bath unusable?

Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

How we price bath re-enamelling

Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:

  • How hard the colour is to match
  • How much damage there is
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

When you take your photos, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Keep toiletries on a shelf rather than in the bath
  • A dripping tap should be fixed promptly
  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

Do not try to scrub a worn bath back to shine. It just wears the enamel further.

What we are called out for in Rossett

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

You may need us if you’ve spotted:

  • Enamel that is lost its shine and feels rough
  • A coloured bath you want in white
  • Worn patches where water runs and sits
  • An old resurfacing that is failing

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • Whether the colour is mixed to match
  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

For landlords and businesses

If you manage property in Rossett, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, normally one day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why us?

  • Colour mixed on the day to match
  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • Nothing taken out or refitted

Take a look at our pricing or guide to resurfacing and replacement costs.

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • A cast iron or steel bath that is cracked right through
  • Leaking taps or wastes (a plumber’s job)
  • Anything hidden under an old coating, until we remove it

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops

Our work in Rossett

Rossett is about 4 miles north-east of Wrexham, in Wrexham. Whether you are in the middle of Rossett or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Rossett is one of 115 places in Wrexham we cover. We work right across the region, from Rossett to Liverpool (21 miles away).

Every address in LL12 is covered. You will find streets such as Station Road, Trevalyn Way and Shordley Close. Main roads around Rossett include the B5445, so getting to you is simple. Other places close to Rossett include Darland (1 mile north-east), Lavister (1 mile north), Trevalyn (1 mile east), Burton (1 mile west) and Marford (1 mile south-west). We also work in nearby towns such as Wrexham (4 miles south-west), Caia Park (5 miles south), Offa (5 miles south-west), Rhosllannerchrugog (8 miles south-west), Rhosddu (5 miles south-west) and Acton (4 miles south-west).

Local landmarks in Rossett

We visit homes around Christ Church, St Peter's CIW Voluntary Controlled Primary School and Butchers Arms. The closest station to Rossett is Cefn-Y-Bedd station, roughly 3.8 miles west. Other landmarks nearby include Trevalyn Manor (0.5 miles south) and Roft Motte (1.1 miles south-west). Green spaces nearby include The Flash and Wilderness Tip (Gresford).

Map of Rossett © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.