Flintshire · England
Bath Re-enamelling in Pulford
Full bath re-enamelling and resurfacing for homes and businesses in Pulford and across Flintshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
Bath re-enamelling at your home in Pulford
We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are a coating lifting around the plughole and lots of chips and rust spots.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Pulford (CH4)
- Area hub
- Flintshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What a repair can’t fix
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Also in Pulford
Pulford and the surrounding area
Pulford is about 5 miles south of Chester, in Flintshire. From the centre of Pulford to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 139 towns and villages across Flintshire. We work right across the region, from Pulford to Liverpool (about 20 miles away).
Every address in CH4 is covered, from the main roads to the quietest streets. You will find streets such as Ivy Court, Burganey Court and Castlehill. We also travel to Lavister (1 mile south), Darland (1 mile south), Cuckoo's Nest (1 mile north-east), Rossett (1 mile south) and Trevalyn (1 mile south). Further out, we also cover Connah's Quay (8 miles north-west), Buckley (7 miles north-west), Bwcle (7 miles north-west), Flint (12 miles north-west), Saltney (4 miles north) and Mold (9 miles west).
Near you in Pulford
Typical jobs here are in homes near St Peter's CIW Voluntary Controlled Primary School, The Nags Head pub and Darland High School. For rail, the closest station is Caergwrle station, roughly 4.2 miles west. Other landmarks nearby include Broughton Shopping Park (3.5 miles north-west) and Trevalyn Manor (1.6 miles south). The countryside around Pulford includes The Flash and Caer Estyn.
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes most of the day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
FAQs for Pulford
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- How much damage there is
- Whether we combine several jobs
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Details of any past repairs
If you’re in Pulford and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Repairing versus replacing in Pulford
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Prices start from £350. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Pulford
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- One price list for the entire UK
- Colour mixed on the day to match
See our prices page and guide to resurfacing and replacement costs.
For landlords and businesses
Landlords, letting agents and housing providers in Pulford use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
