Wrexham · Wales
Bath Re-enamelling in Trevalyn
Damaged bath in Trevalyn? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
Bath re-enamelling in Trevalyn without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with an original cast iron bath that needs restoring and worn patches where water runs and sits, we can generally put it right.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Trevalyn (LL12)
- Area hub
- Wrexham
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Keep a parking space free if you can
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
What affects the price in Trevalyn
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- What the surface is made of
- Whether we combine several jobs
- The size and number of damaged areas
- How hard the colour is to match
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- What it’s made of, if you know
- Something in shot to show the size
- A photo taken from further back
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Signs you need bath re-enamelling in Trevalyn
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Look out for these signs:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- An old resurfacing that’s failing
What your quote should include
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- What preparation is included
- What the guarantee covers, and for how long
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlord and trade work in Trevalyn
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Questions from Trevalyn
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you work in Trevalyn?
Yes, we do. We send a technician to Trevalyn for every job, with no extra charge for travel.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What areas do you cover?
Everywhere in the UK, Trevalyn included. There is no extra charge for travel.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Other services in Trevalyn
Our work in Trevalyn
Trevalyn is about 5 miles north-east of Wrexham, in Wrexham. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 115 towns and villages in Wrexham, from the larger towns to small villages. We work right across the region, from Trevalyn to Liverpool (21 miles away).
Every address in LL12 is covered, from the main roads to the quietest streets. That includes homes on Rossett Road, Broad Lane and Gamford Lane and the roads around them. Neighbouring places we cover include Rossett (1 mile west), Darland (1 mile north-west), Lavister (1 mile north-west), Pulford (1 mile north) and Marford (1 mile west). Further out, we also cover Wrexham (5 miles south-west), Caia Park (5 miles south-west), Offa (6 miles south-west), Rhosllannerchrugog (8 miles south-west), Rhosddu (5 miles south-west) and Acton (4 miles south-west).
Near you in Trevalyn
Locally, our jobs take us to homes close to St Peter's CIW Voluntary Controlled Primary School, Christ Church and Darland High School and the streets around them. The nearest railway station is Cefn-Y-Bedd station, roughly 4.3 miles west. Well-known places in the area include Roft Motte (1.5 miles west) and Trevalyn Manor (0.8 miles south-west). The countryside around Trevalyn includes Wilderness Tip (Gresford) and The Flash.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
