Lincolnshire · England
Bath re-enamelling & resurfacing in Rothwell, Lincolnshire
Bath re-enamelling for Rothwell, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Rothwell without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for several chips and rust patches and a peeling or bubbling previous coating, across basins & shower trays, acrylic baths and cast iron baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Rothwell (LN7)
- Area hub
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Rothwell and nearby
Rothwell is about 9 miles south-west of Grimsby, in Lincolnshire. From the centre of Rothwell to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages. We work right across the region, from Rothwell to Leeds (57 miles away).
All of LN7 is covered, from the main roads to the quietest streets. Jobs here include addresses on Wold View, Caistor Road and Partridge Drive and the roads around them. We also cover the places around Rothwell: Cabourne (1 mile north), Caistor (3 miles north-west), Swallow (3 miles north-east), Nettleton (3 miles west) and Claxby (4 miles south-west). Within a short drive, we also cover Louth (14 miles south-east), New Waltham (9 miles east), Humberston (11 miles east), Market Rasen (7 miles south-west), Welton (15 miles south-west) and Kirton in Lindsey (13 miles west).
Around Rothwell
Our customers here include homes close to Blacksmiths Arms, Caistor Yarborough Academy and Church of St Mary Magdalene, among other places. Further afield, we also cover the area around Caistor Castle Hill (2.5 miles north-west). For a walk, there is Wolds Top.
What else we do in Rothwell
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Rothwell: your questions answered
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Is there any odour?
Expect a mild smell while we’re working.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Rothwell
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Signs you need bath re-enamelling in Rothwell
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers normally mention when they call include:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Wear marks under the taps
- A dull, rough surface that will not come clean
What your quote should include
- Whether the colour is mixed to match
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Who will actually do the work
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Rothwell. The price comes down to:
- Doing more than one item at once
- The material and finish
- Previous DIY repairs that have to come out
- How easy the damage is to reach
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Natural light rather than flash
- A wider photo showing the entire bath
- Your postcode, so we can check dates
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away whether it can be repaired.
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day in most cases. The room is left tidy and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
How to prepare
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
If you’re in Rothwell and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Repair or replace in Rothwell?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Colour-matched on site
- One-year guarantee on every repair
- Most jobs done in one visit
- Nothing taken out or refitted
Read our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
