Somerset · England
Bath Re-enamelling for Rowford homes
Problem with your bath in Rowford? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Wear marks under the taps
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath re-enamelling at your home in Rowford
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s stains that won’t shift and a coating lifting around the plughole, we can typically put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Rowford (TA2)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Rowford
What else we do in Rowford
How to look after the repair
How the surface is treated afterwards matters:
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
Dry the bath after use if possible, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Honest limits
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Colour mixed on the day to match
- No need to remove anything
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Take a look at our prices page or bath cost comparison.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- What kind of damage it is
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Rowford questions
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
The process
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes a full day, and you’re welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Signs you need bath re-enamelling in Rowford
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
If you can see any of these, send us a picture:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
Questions to ask before you book
- How the room is protected while they work
- Aftercare advice
- Whether there are any call-out or travel charges
- What happens if they find more damage
Landlord and trade work in Rowford
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About Rowford
Rowford is about 2 miles north of Taunton, in Somerset. Anywhere in TA2, we carry out the work at your property. Our repair technicians cover 640 places across Somerset, from the larger towns to small villages.
We cover every part of TA2. Other places close to Rowford include Cheddon Fitzpaine (1 mile east), Monkton Heathfield (1 mile east), West Monkton (2 miles east), Bathpool (2 miles south-east) and Walford (2 miles east). We also work in nearby towns such as Bridgwater (7 miles north-east), Chard (13 miles south-east), Burnham-on-Sea (14 miles north), Wellington (7 miles south-west), Sydenham (7 miles north-east) and Somerton (15 miles east).
Landmarks near Rowford
Our customers here include homes close to Cheddon Fitzpaine Church School, Church of St Mary and The Waggon pub. Other local landmarks include Ladymead Community School (0.6 miles south-west), Hestercombe Gardens (0.6 miles north-east) and Pyrland School (0.6 miles south-west). For rail, the closest station is Taunton station, about 1.6 miles south. A little further out are Castle Hotel (2.1 miles south) and Orchard Shopping Centre (2.2 miles south). Not far away are Knowle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
