Norfolk · England
Bath Re-enamelling in Runham
Bath re-enamelling for Runham, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
Bath re-enamelling in Runham, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include a roll-top that’s seen better days and an old resurfacing that’s failing, in cast iron baths, basins & shower trays and acrylic baths.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- Runham (NR29)
- County
- Norfolk
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Runham?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Clients generally contact us about:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Stains that won’t shift
- A peeling or bubbling previous coating
What to look for in a quote
- How your room will be protected
- How soon you can use it again
- How the colour is matched
- A fixed quote, and whether VAT is included
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- What the surface is made of
- Where the damage is and how we get to it
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Natural light rather than flash
To get a price, send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About Runham
Runham is about 4 miles north-west of Great Yarmouth, in Norfolk. Anywhere in NR29, a technician comes to you. Runham is one of 797 places in Norfolk where we work.
Jobs in NR29 are booked in the same way as anywhere else. Local streets include The Street, School Road and Barn Lane, and we cover them all. Neighbouring places we cover include Thrigby (1 mile north), Mautby (1 mile north-east), Filby (2 miles north-east), Burgh St Margaret (2 miles north-west) and Ormesby St Michael (2 miles north). We also work in nearby towns such as Norwich (15 miles west), Great Yarmouth (4 miles south-east), Gorleston-on-Sea (6 miles south-east), Sprowston (13 miles west), Thorpe St Andrew (12 miles west) and Southtown (5 miles south-east).
Around Runham
Our clients here include homes close to Church of St Peter and St Paul. For rail, the closest station is Berney Arms station, roughly 3.6 miles south. Other landmarks nearby include Fishermens Hospital Including Gate Piers And Railings (4.3 miles south-east) and Caister Castle (2.7 miles east). The countryside around Runham includes Filby Broad and Berney Marshes RSPB reserve.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Landlords, agents and businesses in Runham
If you manage property in Runham, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
FAQs for Runham
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How do I get a price for bath re-enamelling in Runham?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item with your NR29 postcode.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in Runham
- We will tell you if it’s not worth repairing
- One price list for the entire UK
- Rooms protected and left tidy
- One-year guarantee on every repair
Read our prices page and guide to resurfacing and replacement costs.
Towns and villages near Runham
Also in Runham
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
