Wiltshire · England
Bath re-enamelling & resurfacing in Rushall, Wiltshire
Bath re-enamelling for Rushall, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coloured bath you want in white
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Bath re-enamelling in Rushall without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, with the bath ready to use the following day. Common call-outs are for a coloured bath you want in white and staining under the taps and around the waste, in basins & shower trays, cast iron baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Rushall (SN9)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Get any chip repaired quickly
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Never use suction bath mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Places near Rushall
Other services in Rushall
Repairing versus replacing in Rushall
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Rushall clients choose us
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- One visit for most repairs
- One price list for the entire UK
See our prices page or bath cost comparison.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes most of the day in most cases. The room is left tidy and you will know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Ask for a price
Upload pictures of the damage and one of the whole item, with your SN9 postcode, and we’ll come back with a fixed quote.
Advice
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- How hard the colour is to match
- How much damage there is
- What the surface is made of
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
You can generally get a fixed price without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
To get a price, send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Rushall: your questions answered
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you cover Rushall?
Yes. We work across the UK and travel to Rushall and the rest of Wiltshire. Send pictures and we’ll quote, or call 0345 017 0787.
How long will the bath be out of use?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Where we work around Rushall
Rushall is about 8 miles south-east of Devizes, in Wiltshire. Wherever you are in the SN9 postcode area, a technician comes to you. Our repair technicians cover 425 places in Wiltshire, from the larger towns to small villages. You can also see our page for London, about 76 miles away.
Our visits in SN9 work the same way as everywhere else we cover. From Devizes Road, Pewsey Road and Church Lane or a nearby road, a technician can come to you. Being close to the A342, Rushall is simple for us to get to. Other places close to Rushall include Charlton St Peter (1 mile west), Woodbridge (1 mile north-east), Manningford Bohune (2 miles north-east), Hilcott (2 miles north-west) and Bottlesford (2 miles north-west). Within a short drive, we also cover Calne (12 miles north-west), Devizes (8 miles north-west), Melksham (14 miles west), Amesbury (9 miles south), Marlborough (9 miles north-east) and Old Sarum (14 miles south).
Near you in Rushall
We visit homes around Church of St Matthew and Rushall Church of England Primary School, among other places. For rail, the closest station is Pewsey station, roughly 3.6 miles north-east. Nearby you will also find Pewsey Heritage Centre (3.7 miles north-east). Green spaces nearby include Knap Hill.
Honest limits
In fairness, some problems need a different fix:
- Steel that has corroded right through
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Signs you need bath re-enamelling in Rushall
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
Comparing quotes
- Who will actually do the work
- How long the guarantee is and what it covers
- How long it needs to cure
- How to care for the finish
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
