Lancashire · England
Bath Re-enamelling in Salterforth
Bath re-enamelling in Salterforth without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
Bath re-enamelling in Salterforth without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the day after. If you are dealing with a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, we can help, whatever the material.
All of our repairs are guaranteed for twelve months in Salterforth and everywhere else. If something goes wrong with the work, we come back.
- Location
- Salterforth (BB18)
- County
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Get a quote
Send us pictures of the damage and one of the whole item, with your BB18 postcode, and we will come back with a fixed quote.
Advice
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs right away
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlords, agents and businesses in Salterforth
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Your questions about bath re-enamelling in Salterforth
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Also near Salterforth
What else we do in Salterforth
Salterforth and nearby
Salterforth is about 1 mile south-east of Barnoldswick, in Lancashire. We travel to customers in Salterforth, so there is no workshop to go to. Salterforth is one of 482 places in Lancashire we cover. You can also see our page for Leeds, about 26 miles away.
Postcode districts we cover here: BB18. Jobs here include addresses on Hayfields, Sandhills Close and Gateland and the roads around them. Other places close to Salterforth include Sough (1 mile east), Barnoldswick (1 mile north-west), Earby (1 mile north-east), Coates (1 mile north) and Bracewell (2 miles north-west). Within a short drive, we also cover Burnley (8 miles south), Accrington (13 miles south-west), Nelson (5 miles south), Rawtenstall (15 miles south), Colne (3 miles south) and Clitheroe (10 miles west).
What’s near Salterforth
Locally, our jobs take us to homes close to Salterforth Primary School, St Mary's Church and West Craven High Technology College and the streets around them. Salterforth’s nearest station is Colne station, about 3.5 miles south of the centre. A little further out are Pendle Community Hospital (4.9 miles south) and Bancroft Shed (1.1 miles west). Not far away are Noyna Hill.
Signs you need bath re-enamelling in Salterforth
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Most people get in touch after spotting one of these:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Stains that won’t shift
- A roll-top that is seen better days
What to look for in a quote
- Aftercare advice
- What protection goes down before work starts
- Whether a trained technician does the job
- Whether the price covers travel
Repair or replace in Salterforth?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Salterforth
- Colour-matched on site
- One visit for most repairs
- Fixed prices from your photos
- One-year guarantee on every repair
See our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How many items we do on one visit
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
You can take the photos on your phone. Make sure they show:
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A metal bath with a through crack
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
