Wiltshire · England
Bath re-enamelling & resurfacing in Sandridge, Wiltshire
Full bath re-enamelling and resurfacing for homes and businesses in Sandridge and across Wiltshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Stains that will not shift
- An original cast iron bath that needs restoring
Bath re-enamelling in Sandridge without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include worn patches where water runs and sits and a period or roll-top bath worth keeping, on Victorian roll-tops, basins & shower trays and pressed steel baths.
Every repair comes with a one-year guarantee, wherever you are in Wiltshire.
- Where
- Sandridge (SN12, SN15)
- Region
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Sandridge
Sandridge is about 1 mile east of Melksham, in Wiltshire. We visit customers in Sandridge, so nothing has to leave your home. Sandridge is one of 425 places in Wiltshire we cover. You can also see our page for Birmingham, about 76 miles away.
Postcode districts we cover here: SN12 and SN15. Other places close to Sandridge include Melksham (1 mile west), Redstocks (1 mile south), Bowerhill (2 miles south-west), Beanacre (2 miles north-west) and Berryfield (2 miles south-west). Further out, we also cover Trowbridge (6 miles south-west), Chippenham (5 miles north), Calne (6 miles north-east), Devizes (5 miles east), Westbury (9 miles south-west) and Warminster (13 miles south).
Local landmarks in Sandridge
Around Sandridge, we work in homes near Forest and Sandridge Church of England Primary School, Church of St Andrew and Melksham Oak Community School. The closest station to Sandridge is Melksham station, about 1.9 miles west. Nearby you’ll also find Avon Tyre Museum (1.9 miles west) and Shane's Castle (4.5 miles south-east). The countryside around Sandridge includes King's Play Hill.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Fix dripping taps quickly
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Repairing versus replacing in Sandridge
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why book with us
- One-year guarantee on every repair
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
Take a look at our full price list or resurfacing vs replacement cost guide.
Towns and villages near Sandridge
Also in Sandridge
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
What affects the price in Sandridge
Prices start from £350. There’s no charge for travel to Sandridge. The price depends on:
- How many items we do on one visit
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Natural light rather than flash
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Most customers in Sandridge get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Your questions about bath re-enamelling in Sandridge
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
How do I get a price for bath re-enamelling in Sandridge?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Sandridge
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Signs you need bath re-enamelling in Sandridge
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for any of the following:
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Comparing quotes
- How your room will be protected
- If travel is included in the price
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
