South Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Scottish Borders, South Lanarkshire
Our repair technicians come to Scottish Borders for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in Scottish Borders
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with an outdated colour you’d like to change and chips and rust in more than one place, we can help.
Every repair is covered by our one-year guarantee.
- Where
- Scottish Borders (ML12)
- Area hub
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Your questions about bath re-enamelling in Scottish Borders
Do you cover Scottish Borders?
Yes. We work across the UK and travel to Scottish Borders and the rest of South Lanarkshire. Send us photos for a fixed quote, or call 0345 017 0787.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across South Lanarkshire.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Scottish Borders and the surrounding area
Scottish Borders is about 22 miles south-east of Carluke, in South Lanarkshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Our repair technicians cover 139 places in South Lanarkshire, from the larger towns to small villages. You can also see our page for Edinburgh, about 31 miles away.
All of ML12 is covered, from the main roads to the quietest streets. Main roads around Scottish Borders include the A701, which makes travel easy. Nearby, we also work in Broughton (7 miles north), Coulter (7 miles north-west), Biggar (8 miles north-west), Skirling (9 miles north) and Symington (9 miles north-west).
What’s near Scottish Borders
We visit homes around Tweedsmuir Parish Church and Crook Inn and the streets around them. Other landmarks nearby include Oliver Castle (0.9 miles south-west). Not far away are Glenwhappen Rig.
More services for Scottish Borders
What affects the price in Scottish Borders
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How many areas need work
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- What the surface is made of
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repairing versus replacing in Scottish Borders
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Scottish Borders
- One-year guarantee on every repair
- Colour mixed on the day to match
- Dust sheets down, tidy finish
- Everything repaired in place
Take a look at our full price list or resurfacing vs replacement cost guide.
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It typically takes most of the day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
Materials we work on in Scottish Borders
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
