Cornwall · England
Bath Re-enamelling for Seaureaugh Moor homes
Full bath re-enamelling and resurfacing at your home in Seaureaugh Moor, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Bath re-enamelling in Seaureaugh Moor without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. We’re often asked to fix a roll-top that’s seen better days and a coating lifting around the plughole, in acrylic baths, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Seaureaugh Moor (TR3)
- County
- Cornwall
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Seaureaugh Moor
Seaureaugh Moor is about 3 miles north-west of Penryn, in Cornwall. From the centre of Seaureaugh Moor to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 644 towns and villages across Cornwall, from the larger towns to small villages.
All of TR3 is within our area, from the main roads to the quietest streets. Local streets include Hendra Road, Church Road and Crellow Lane, all of which we cover. If you are just outside Seaureaugh Moor, we cover Hendra (1 mile south-west), Stithians (1 mile south), Foundry (1 mile south-east), Tresevern Croft (1 mile west) and Ponsanooth (2 miles east). Larger places within reach include Truro (7 miles north-east), Falmouth (5 miles south-east), Camborne (5 miles west), Redruth (4 miles north-west), Helston (7 miles south-west) and Hayle (10 miles west).
What’s near Seaureaugh Moor
Typical jobs here are in homes near Stithians Community Primary School, Church of Saint Stedian and Seven Stars Public House, among other places. The closest station to Seaureaugh Moor is Perranwell station, roughly 3.3 miles north-east of the centre. Further afield, we also cover the area around Camborne Redruth Community Hospital (3.8 miles north-west) and Museum of Cornish Methodism (2.6 miles north). Not far away are Carnmenellis.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Your questions about bath re-enamelling in Seaureaugh Moor
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
Expect a mild smell while we are working.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Colour-matched on site
- Everything repaired in place
- Straight answers about what a repair can do
- We leave the room as we found it
Take a look at our full price list or bath cost comparison.
Common problems we fix in Seaureaugh Moor
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A coloured bath you want in white
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
What your quote should include
- Whether the price is fixed and includes VAT
- Who turns up on the day
- How the colour is matched
- What the guarantee covers, and for how long
Nearby places to Seaureaugh Moor
What else we do in Seaureaugh Moor
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A bath that is rusted through
Send us pictures and we will tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes most of the day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
What affects the price in Seaureaugh Moor
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The material
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many items we do on one visit
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- What it’s made of, if you know
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
