Powys · Wales
Bath Re-enamelling in Sennybridge
Full bath re-enamelling and resurfacing in Sennybridge, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
How we handle bath re-enamelling in Sennybridge
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We’re frequently asked to fix a coloured bath you want in white and stains that won’t shift, on basins & shower trays, acrylic baths and Victorian roll-tops.
Big or small, it’s backed by a one-year guarantee.
- Area
- Sennybridge (LD3)
- Region
- Powys
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Keeping it looking good
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairing versus replacing in Sennybridge
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- One price list for the whole UK
- We leave the room as we found it
- Every repair guaranteed for a year
- Straight answers about what a repair can do
Take a look at our pricing or bath cost comparison.
Common questions in Sennybridge
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What areas do you cover?
We work UK-wide, so Sennybridge is covered. Prices do not change with location.
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- The colour and finish to match
- Doing more than one item at once
- Any earlier repairs that need removing first
- Access to the area
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- Something in shot to show the size
- One sharp close-up of the damage
- Where you are, by postcode
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
When to call us in Sennybridge
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Customers usually contact us about:
- Worn patches where water runs and sits
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Before booking anyone
- How long the guarantee is and what it covers
- When it can be used again
- Who turns up on the day
- Whether the colour is mixed to match
What we can’t put right
We will not take on work that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Landlord and trade work in Sennybridge
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Also near Sennybridge
What else we do in Sennybridge
Where we work around Sennybridge
Sennybridge (Welsh: Pontsenni) is about 16 miles north-west of Merthyr Tydfil, in Powys. We visit homes and businesses in Sennybridge, so you don’t need to take anything anywhere. Our repair technicians cover all 234 towns and villages across Powys, from the larger towns to small villages. You can also see our page for Birmingham, about 80 miles away.
Postcode districts we cover here: LD3. From High Street, Defynnog Road and Coedbach or a nearby road, a technician can come to you. Other places close to Sennybridge include Defynnog (1 mile south-east), Trecastle (3 miles west), Llywel (3 miles west), Tai'r Bull (5 miles east) and Yscir (5 miles east). Within a short drive, we also cover Brecon (8 miles east), Ystradgynlais (14 miles south-west), Llanfaes (7 miles east), Y Gurnos (15 miles south-west), Talgarth (15 miles east) and Pendre (8 miles east).
Landmarks near Sennybridge
Around Sennybridge, we work in homes near St Cynog's Church and The Red Lion pub and the streets around them. A little further out are Castell Du (within half a mile south-west). Not far away are Yr Allt and Llyn Traeth-Bach.
The process
We work cleanly and quietly. Protection goes down first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
