Wiltshire · England

Bath Re-enamelling for Sherrington homes

Our repair technicians come to Sherrington for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Sherrington homes

Bath re-enamelling in Sherrington, done in place

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with enamel that’s lost its shine and feels rough and thin, worn enamel in places, we can help, on Victorian roll-tops, basins & shower trays and pressed steel baths alike.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Sherrington (BA12)
County
Wiltshire
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Repair or replace in Sherrington?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Straight answers about what a repair can do
  • No need to remove anything
  • A year’s guarantee on all work
  • Technicians who travel to you, UK-wide

See our pricing or bath cost comparison.

How the visit works

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to most of the day, tidy-up included.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Make sure the room can be ventilated
  • Have somewhere for us to park nearby if possible

Get a quote

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

Common questions in Sherrington

How long is the bath unusable?

Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so mention it when you send photos.

Is there a smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you work in Sherrington?

Yes. We work across the UK and travel to Sherrington and the rest of Wiltshire. Send pictures and we will quote, or call 0345 017 0787.

Can you make a coloured bath white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Our work in Sherrington

Sherrington is about 7 miles south-east of Warminster, in Wiltshire. Across the BA12 area, a technician comes to you. Our repair technicians cover 425 places in Wiltshire.

All of BA12 is within our area. Other places close to Sherrington include Codford St Peter (1 mile north-east), Codford St Mary (1 mile east), Upton Lovell (2 miles north-west), Corton (2 miles north-west) and Bapton (2 miles east). We also work in nearby towns such as Salisbury (12 miles south-east), Trowbridge (13 miles north-west), Devizes (14 miles north), Westbury (10 miles north-west), Warminster (7 miles north-west) and Amesbury (13 miles east).

What’s near Sherrington

We visit homes around Greenways School and Church of St Cosmas and St Damian and the streets around them. Well-known places in the area include East Castle (4.7 miles south-east). Open spaces near Sherrington include Fonthill Lake.

Map of Sherrington © OpenStreetMap contributors

When a repair is not the answer

It helps to know what we cannot do too:

  • A bath that’s rusted through
  • An acrylic bath that flexes badly underfoot
  • A bath split right through the body

If in doubt, send photos and we’ll say what we think.

Materials we work on in Sherrington

  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

Signs you need bath re-enamelling in Sherrington

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Common reasons people in Sherrington contact us are:

  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
  • A period or roll-top bath worth keeping
  • A dull, rough surface that won’t come clean

Comparing quotes

  • Whether the colour is mixed to match
  • Who will actually do the work
  • How long the guarantee is and what it covers
  • How to care for the finish

10 questions to ask before you book

How we price bath re-enamelling

Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • What the surface is made of
  • How much damage there is

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

You can typically get a fixed price without us visiting. To make it quick:

  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • Where you are, by postcode

If you’re in Sherrington and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Keeping it looking good

Once the work has cured, treat it gently:

  • A dripping tap should be fixed promptly
  • Avoid suction-cup mats
  • A quick wipe after use keeps limescale away
  • Keep toiletries on a shelf rather than in the bath

Dry the bath after use if possible, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.