Wiltshire · England
Bath Re-enamelling for Upton Lovell homes
We travel to Upton Lovell for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
Covering Upton Lovell
Upton Lovell is about 5 miles south-east of Warminster, in Wiltshire. Whether you’re in the middle of Upton Lovell or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 425 places across Wiltshire, from the larger towns to small villages.
We work across the BA12 postcode area. You will find streets such as Up Street, Manor Road and Jonathan's Path. Other places close to Upton Lovell include Corton (1 mile west), Sherrington (2 miles south-east), Codford St Peter (2 miles south-east), Codford St Mary (2 miles south-east) and Bapton (3 miles south-east). Larger places within reach include Salisbury (14 miles south-east), Trowbridge (12 miles north-west), Devizes (13 miles north), Westbury (8 miles north-west), Melksham (14 miles north) and Warminster (5 miles north-west).
Near you in Upton Lovell
Around Upton Lovell, we work in homes near St Augustine's church and Greenways School. The closest station to Upton Lovell is Warminster station, about 4.9 miles north-west. Well-known places in the area include Motte and double ringwork east of Bishopstrow Farm (3.3 miles north-west).
Bath re-enamelling in Upton Lovell without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and common reasons people contact us are a bath that stays dull however much you clean it and brown or grey marks that don’t clean off.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Upton Lovell (BA12)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Do you need bath re-enamelling in Upton Lovell?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
You may need us if you’ve spotted any of these:
- A dull, rough surface that won’t come clean
- A roll-top that’s seen better days
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Before booking anyone
- A fixed quote, and whether VAT is included
- What preparation is included
- What the guarantee covers, and for how long
- What protection goes down before work starts
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Upton Lovell. The price reflects:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Our prices are the same across the UK, so there is no premium for Upton Lovell. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Two or three clear photos are usually enough. It helps if you send:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- Natural light rather than flash
- The material, if you know it
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Towns and villages near Upton Lovell
Also in Upton Lovell
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Every repair guaranteed for a year
- One price list for the whole UK
- Nothing taken out or refitted
- A fixed quote before you book
Read our pricing and resurfacing vs replacement cost guide.
Keeping it looking good
Once the work has cured, treat it gently:
- Never use suction bath mats
- Respect the curing time we give you
- Fix dripping taps quickly
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Upton Lovell: your questions answered
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you cover the entire of Wiltshire?
We cover the entire UK, including Upton Lovell and the rest of Wiltshire. Just include your postcode and we’ll offer you dates.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What happens after I send photos?
We review the pictures and send a fixed quote.
How much does bath re-enamelling cost in Upton Lovell?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Honest limits
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
