Pembrokeshire · Wales
Bath Re-enamelling in Tangiers
Our repair technicians come to Tangiers for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that will not come clean
About Tangiers
Tangiers is about 2 miles north of Haverfordwest, in Pembrokeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
Postcode districts we cover here: SA62. Close by, we cover Withybush (1 mile north-east), Crundale (1 mile east), Prendergast (1 mile south), Slade (1 mile south-west) and Haverfordwest (2 miles south). We also work in nearby towns such as Milford Haven (8 miles south), Pembroke (11 miles south), Pembroke Dock (9 miles south), The Green (15 miles south-east), Fishguard (12 miles north) and Green (10 miles south).
Around Tangiers
Around Tangiers, we work in homes near The Lost Coins pub and Sir Thomas Picton School. The nearest railway station is Haverfordwest station, about 1.7 miles south of the centre. Nearby you will also find Withybush General Hospital (1 mile south) and Welsh Spitfire Museum (1.6 miles south). The countryside around Tangiers includes Boulston Hill.
Bath re-enamelling at your home in Tangiers
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with a bath in a colour that no longer suits and a coating lifting around the plughole, we can normally put it right.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Tangiers (SA62)
- County
- Pembrokeshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Tangiers
What else we do in Tangiers
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repair or replace in Tangiers?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- We come to you, anywhere in the UK
- Colour mixed on the day to match
Read our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- One picture of the entire bath
- Details of any past repairs
- The postcode, so we can plan the visit
Most customers in Tangiers get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
When to call us in Tangiers
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for these signs:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
What to look for in a quote
- What happens if they find more damage
- How soon you can use it again
- How your room will be protected
- What aftercare is recommended
Common questions in Tangiers
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work in Tangiers?
We do. We send a technician to Tangiers for every job, and the price is the same as everywhere else.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
