Hampshire · England
Bath re-enamelling & resurfacing in South Harewood, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in South Harewood and across Hampshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
About our bath re-enamelling in South Harewood
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for an old resurfacing that’s failing and worn patches where water runs and sits, across pressed steel baths, basins & shower trays and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee in South Harewood and across Hampshire.
- Area
- South Harewood (SP11)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- How many items we do on one visit
- The colour and finish to match
- How much damage there is
- The material and finish
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Two or three clear pictures are usually enough. Try to include:
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Where you are, by postcode
For a price in South Harewood, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Places near South Harewood
More services for South Harewood
Common problems we fix in South Harewood
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People typically call us after spotting one of these:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Stains that won’t shift
- A peeling or bubbling previous coating
Questions to ask before you book
- What happens if they find more damage
- Who turns up on the day
- Whether they match the colour on site
- How long the guarantee is and what it covers
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for South Harewood. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- No need to remove anything
- We come to you, anywhere in the UK
- No extra charge for your area
- Honest advice, even when it means no job
Take a look at our pricing and guide to resurfacing and replacement costs.
How to look after the repair
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Questions from South Harewood
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How much does bath re-enamelling cost in South Harewood?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- A bath that is rusted through
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About South Harewood
South Harewood is about 4 miles south-east of Andover, in Hampshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. South Harewood is one of 683 places in Hampshire where we work. Our nearest city page is London, about 61 miles away.
All of SP11 is covered, from the main roads to the quietest streets. We also cover the places around South Harewood: Wherwell (1 mile south-west), Wherwell Wood (2 miles west), Chilbolton (2 miles south-west), Cottonworth (2 miles south-west) and Fullerton (3 miles south-west). We also work in nearby towns such as Basingstoke (15 miles north-east), Winchester (9 miles south-east), Eastleigh (15 miles south), Andover (4 miles north-west), Chandler's Ford (13 miles south) and Romsey (13 miles south).
Local landmarks in South Harewood
Around South Harewood, we work in homes near Wherwell Primary School and the streets around them. The closest station to South Harewood is Andover station, roughly 4 miles north-west. Well-known places in the area include Andover War Memorial Hospital (4.3 miles north-west) and Finkley Down Farm Museum (3.5 miles north-west). For a walk, there’s Mill Lake and Anton Lakes.
About our accreditations · Every repair comes with a one-year guarantee.
