Monmouthshire · Wales
Bath Re-enamelling in Southbrook
Bath re-enamelling in Southbrook without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
FAQs for Southbrook
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Bath re-enamelling in Southbrook without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We are often asked to fix stains that won’t shift and a peeling or bubbling previous coating, across basins & shower trays, cast iron baths and pressed steel baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Southbrook (NP26)
- Region
- Monmouthshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Southbrook
Also in Southbrook
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
How to get a price
If you are in Southbrook and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We look at:
- The material and finish
- Previous DIY repairs that have to come out
- The colour and finish to match
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
What we are called out for in Southbrook
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Stains that will not shift
What to look for in a quote
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- How the colour is matched
- Whether a trained technician does the job
Our work in Southbrook
Southbrook is about 4 miles south-west of Chepstow, in Monmouthshire. Jobs in Southbrook are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover 115 places across Monmouthshire. Our jobs stretch from Southbrook to Birmingham (70 miles away).
Our visits in NP26 work the same way as everywhere else we cover. Other places close to Southbrook include Portskewett (1 mile north-west), Sudbrook (1 mile south-east), Black Rock (1 mile east), Cil-y-coed (1 mile west) and Rogiet (3 miles west). Within a short drive, we also cover Chepstow (4 miles north-east), Monmouth (15 miles north), Bulwark (4 miles north-east), Overmonnow (15 miles north), Gwndy (4 miles west) and Magor (5 miles west).
What’s near Southbrook
Our clients here include homes close to Archbishop Rowan Williams CIW School, Portskewett Inn and Church of St Mary, among other places. The closest station to Southbrook is Caldicot station, roughly 1.6 miles west. Other landmarks nearby include Deepweir Tump (0.8 miles west) and Caldicot Castle Museum (0.9 miles north-west). Green spaces nearby include Ifton Hill and Magor Marsh.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
- Dust sheets down, tidy finish
- One-year guarantee on every repair
Take a look at our full price list or bath cost comparison.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
