Monmouthshire · Wales
Bath re-enamelling & resurfacing in Sudbrook, Monmouthshire
We travel to Sudbrook for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our bath re-enamelling in Sudbrook
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, on pressed steel baths, Victorian roll-tops and basins & shower trays.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Sudbrook (NP26)
- Region
- Monmouthshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Where we work around Sudbrook
Sudbrook is about 4 miles south-west of Chepstow, in Monmouthshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Sudbrook is one of 115 towns and villages in Monmouthshire where we work. We work right across the region, from Sudbrook to Birmingham (71 miles away).
Our repair technicians cover all of NP26 and the streets around it. You’ll find streets such as Great Spring Road, Sudbrook Road and Lave Way, and we cover them all. We also cover the places around Sudbrook: Southbrook (1 mile north-west), Portskewett (1 mile north-west), Black Rock (1 mile north-east), Cil-y-coed (2 miles west) and Rogiet (3 miles west). Within a short drive, we also cover Chepstow (4 miles north-east), Bulwark (4 miles north-east), Overmonnow (15 miles north), Gwndy (4 miles west), Magor (5 miles west) and Usk (11 miles north-west).
Landmarks near Sudbrook
Typical jobs here are in homes near Archbishop Rowan Williams CIW School, Caldicot Comprehensive School and Holy Trinity Church. For rail, the closest station is Caldicot station, about 1.8 miles west. Nearby you will also find Caldicot Castle Museum (1.2 miles north-west) and St Lawrence Hospital (4 miles north). For a walk, there’s Magor Marsh and Ifton Hill.
Nearby places to Sudbrook
What else we do in Sudbrook
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Monmouthshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repair or replace in Sudbrook?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Sudbrook customers choose us
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
See our pricing or resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Honest limits
In fairness, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
When to call us in Sudbrook
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Signs it’s time to call us include:
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
- Chips and rust in more than one place
- An old resurfacing that’s failing
What your quote should include
- How the room is protected while they work
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- What prep work is covered
Common questions in Sudbrook
How long does re-enamelling take?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
