Southend-on-Sea · England
Bath Re-enamelling in Southchurch
Full bath re-enamelling and resurfacing at your home in Southchurch, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Southchurch
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on basins & shower trays, acrylic baths and cast iron baths, and people most often call us about worn patches where water runs and sits and enamel that’s lost its shine and feels rough.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Southchurch (SS2, SS1)
- Area hub
- Southend-on-Sea
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Signs you need bath re-enamelling in Southchurch
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Before you book anyone
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- How the colour is matched
- What happens if they find more damage
Landlords, agents and businesses in Southchurch
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
For anyone letting property in or around Southchurch, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Also near Southchurch
More services for Southchurch
Where we work around Southchurch
Southchurch is about 2 miles east of Southend-on-Sea, in Southend-on-Sea. Our technicians come to homes and businesses in Southchurch and nearby villages, so there’s no workshop to go to. Southchurch is one of 16 places in Southend-on-Sea where we work. Our jobs stretch from Southchurch to London (36 miles away).
Our visits in SS2 and SS1 are booked in the same way as anywhere else. You’ll find streets such as Oban Road, Chase Road and Durham Road, all of which we cover. Neighbouring places we cover include Thorpe Bay (1 mile south-east), Prittlewell (1 mile west), Stonebridge (2 miles north-east), North Shoebury (2 miles east) and Shoeburyness (2 miles east). Larger places within reach include Leigh-on-Sea (4 miles west), Chalkwell (3 miles west), Eastwood (4 miles north-west) and Great Wakering (3 miles east).
Landmarks near Southchurch
Locally, our jobs take us to homes close to Futures Community College, Hamstel Infant School and Nursery and Hope Hotel and the streets around them. Nearby too are Southend High School for Girls (under half a mile east), Garon Park (1 mile north) and Church of the Holy Trinity (within half a mile east). There is a railway station in Southchurch itself: Southend East station. Further afield, we also cover the area around Southend University Hospital (2.3 miles west) and Southend Historic Aircraft Museum (2 miles north-west). The countryside around Southchurch includes Gunners Park and Shoebury Ranges.
Repair or replace in Southchurch?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- We leave the room as we found it
- One price list for the entire UK
- We will tell you if it’s not worth repairing
- One-year guarantee on every repair
Read our pricing and resurfacing vs replacement cost guide.
What we can’t put right
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
FAQs for Southchurch
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so mention it when you send pictures.
Which areas do you work in?
We cover the whole UK, including Southchurch and the rest of Southend-on-Sea. Just include your postcode and we will offer you dates.
How long will the bath be out of use?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes most of the day, and we’ll keep you posted as we go.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
- Avoid suction-cup mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
