Oxfordshire · England
Bath Re-enamelling for Spelsbury homes
Bath re-enamelling in and around Spelsbury: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Wear marks under the taps
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Getting a price
Most customers in Spelsbury get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About our bath re-enamelling in Spelsbury
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with a coating lifting around the plughole and staining under the taps and around the waste, we can normally put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Spelsbury (OX7)
- Region
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Also in Spelsbury
When to call us in Spelsbury
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Common reasons people in Spelsbury contact us are:
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
Questions to ask before you book
- Who turns up on the day
- What prep work is covered
- How changes to the job are handled
- Whether there are any call-out or travel charges
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Where we work around Spelsbury
Spelsbury is about 7 miles north of Witney, in Oxfordshire. From the centre of Spelsbury to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Spelsbury is one of 443 places in Oxfordshire we cover. We work right across the region, from Spelsbury to Birmingham (43 miles away).
Every address in OX7 is covered, from the main roads to the quietest streets. From Quickset Close and Chadlington Road or a nearby road, we can come to you. If you are just outside Spelsbury, we cover Charlbury (2 miles south-east), Fawler (3 miles south-east), Finstock (4 miles south), Stonesfield (4 miles south-east) and Ramsden (4 miles south). Further out, we also cover Oxford (15 miles south-east), Banbury (13 miles north-east), Bicester (14 miles east), Witney (7 miles south), Carterton (10 miles south-west) and Kidlington (10 miles south-east).
Local landmarks in Spelsbury
Around Spelsbury, we work in homes near Chadlington Church of England Primary School and Church of All Saints, among other places. Spelsbury’s nearest station is Charlbury station, roughly 1.5 miles south. Further afield, we also cover the area around Chipping Norton Museum (3.9 miles north-west). Not far away are Blenheim Farm.
Your questions about bath re-enamelling in Spelsbury
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
What happens next?
You’ll get a fixed quote back, plus dates. You are under no obligation.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Spelsbury. The price depends on:
- Access to the area
- How much damage there is
- Doing more than one item at once
- How hard the colour is to match
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- A picture taken from further back
- Natural light rather than flash
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
How to care for the repair
How the surface is treated afterwards matters:
- Have chips seen to early
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What a repair can’t fix
It helps to know what we can’t do:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly.
Materials we work on in Spelsbury
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
