Cornwall · England
Bath re-enamelling & resurfacing in Splatt, Cornwall
Problem with your bath in Splatt? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Bath re-enamelling in Splatt without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a bath in a colour that no longer suits and an old resurfacing that’s failing, on Victorian roll-tops, acrylic baths and basins & shower trays.
We stand behind the work with a one-year guarantee.
- Where
- Splatt (PL27)
- County
- Cornwall
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Places near Splatt
Also in Splatt
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Covering Splatt
Splatt is about 10 miles north-west of Bodmin, in Cornwall. Clients in Splatt get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We work in all 644 towns and villages across Cornwall, from the larger towns to small villages.
Our repair technicians cover all of the PL27 postcode area. From Longhouse Lane, Trelyn and Croftlands or a nearby road, we can come to you. Close by, we cover Rock (1 mile south-west), Porthilly (1 mile south-west), Trebetherick (2 miles north-west), Polzeath (2 miles north) and Padstow (2 miles south-west). Larger places within reach include Newquay (12 miles south-west), St Austell (15 miles south), Bodmin (10 miles south-east), Sandy Bottom (15 miles south), Bethel (15 miles south-east) and Wadebridge (4 miles south-east).
Near you in Splatt
We visit homes around Church of St Michael and St Minver School, among other places. A little further out are Shipwreck Museum (1.8 miles south-west) and Doyden Castle (2.9 miles north-east). Open spaces near Splatt include Brea Hill.
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
Get a quote
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Why Splatt clients choose us
- Every repair guaranteed for a year
- Work done at your home or business
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
See our prices page and bath cost comparison.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Splatt questions
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Do you cover Splatt?
We do. We send a technician to Splatt for every job, and the price is the same as everywhere else.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How do I get a price for bath re-enamelling in Splatt?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your PL27 postcode.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price depends on:
- The material
- Access to the area
- Previous DIY repairs that have to come out
- The colour and finish to match
We charge the same wherever you are, so there’s no premium for Splatt. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A photo taken from further back
- Something in shot to show the size
- The material, if you know it
- A clear, close picture of the problem area
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
